Get your PCBs made

Posted on Tuesday, July 5th, 2011 in PCBs by Ian

Digital DIY has a run down of PCB manufacturing options.

Adafruit also has a nice one, and we’ve discussed it in the forum.

Via Hacked Gadgets.

This entry was posted on Tuesday, July 5th, 2011 at 12:00 pm and is filed under PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

8 Responses to “Get your PCBs made”

  1. Doub says:

    It would be nice to find a similar listing for PCB assembly too, for very small projects hard to assemble manually.

    • Ian says:

      I’m afraid it is a very short list. I don’t know of any that do less than 100. Maybe batchPCB PCB123(?) or one of the other “all-in” board people.

  2. octal says:

    hi Ian, seems to offer making very low quantities, and offers full assembly for first board for free, and seems to offer also analog (or passive dont remember) components for free.
    Try to check its offer!

  3. Michael Zemek says:

    Interesting PCB in the picture. What is it?

  4. kmmankad says:

    @Michael Zemek : My guess would be an atmega board :P

  5. Michael Zemek says:

    There appears to be LCD display solder pads. 40 pin IC could be any microcontroller. Place for TO220 regulator.

    Ian where did this come from.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!