Categories

DIY Geiger counter

Posted on Saturday, May 7th, 2011 in project logs by Ian

Rubi shared his Geiger counter based on a Russian SMB-20 tube in the project log forum.

Thanks Rubi!

This entry was posted on Saturday, May 7th, 2011 at 10:13 am and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “DIY Geiger counter”

  1. John says:

    The picture above is actually from a Geiger kit – available at https://sites.google.com/site/diygeigercounter/home

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: So these go for around $330 USD and NO published calibration procedure online or otherwise? Given what's inside - I don't think I'll be considering...
  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...