27C3: File – Print – Electronics

Posted on Friday, January 7th, 2011 in Development, manufacturing, PCBs, reversed by the machinegeek

In this presentation from the 27C3 conference held recently in Berlin, Germany, Jeff Gough demonstrates the next step in hardware development, the circuit board printer. As an alternative to dependence on prefab dev boards and kits, Jeff outlines his efforts in reverse engineering an Epson inkjet printer to build a rapid prototyping machine for circuit boards.

This entry was posted on Friday, January 7th, 2011 at 4:05 pm and is filed under Development, manufacturing, PCBs, reversed. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “27C3: File – Print – Electronics”

  1. Jan says:

    Folks, it is pointless to post these videos as they are obviously a live feed. Whenever you post it, the event is long over already!

  2. bearmos says:

    around 41:00 in the video, you can see a logic sniffer put to use during the reverse engineering portion. nice to know it’s being put to work around the world!

  3. madkiwi says:

    Thanks for showing the videos for the people that weren’t able to watch the live feeds or attend because were on the other side of the world

  4. thewonko says:

    yes, thank you from yet another side of the world. where the internet connections are slow and live feeds are not really possible.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Max: Hey, good job quoting as an abstract something the author writes about someone else's project... For the record, I do appreciate the proper attention to...
  • imqqmi: Also interesting to note that arduino's use the DTR signal to reset the device. I found this out because repetier was able to do this...
  • Kevin: A bit sad that you are using a knock off Saleae device unless you are not using Saleae software.
  • Max: For the Haxxor Edition he could add a Morse-to-scan-code translator to the code in the PIC (where the L337 Haxxor Special also accepts Unicode code...
  • KH: Someone with a PIC16F1459 project, well you don't see these every day. Methinks he repeats the USB 2.0 thing too much; this might mislead people...