Categories

Logitech Revue rooted

Posted on Wednesday, January 5th, 2011 in demonstrations, hacks, scripts by the machinegeek

GTV Hacker has developed a guide to installing applications and rooting your Logitech Revue. The new hack uses the Revue’s UART1 port to upload a start-up script which allows “root” access, allowing the installation of your own apps and access the full filesystem. You need to solder a set of leads to the mainboard and then connect to the box using a terminal program.

Via CrunchGear.

This entry was posted on Wednesday, January 5th, 2011 at 5:02 pm and is filed under demonstrations, hacks, scripts. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Logitech Revue rooted”

  1. Miranda says:

    I don’t know if this is completely necessary. I installed my Revue and it was fast and easy. I have no problem with apps and other functions, it runs very smoothly. During its initial production, working at DISH I was so excited that I was going to be able to get this product; and fast! I got it and now after having for some time, I couldn’t imagine going back from it.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...