Categories

Posts Tagged ‘OSHW’

How to choose an open source hardware license

Tuesday, October 22nd, 2013

Makers in the open source hardware community are usually more preoccupied with tech details, with licensing considerations being an afterthought. This can lead to unintended consequences resulting from releasing a design under what proves to be either too permissive or restrictive. Simone Cicero tries to clear up confusion over characteristics...

Tags: ,
Posted in documentation, open source | Comments Off on How to choose an open source hardware license

OSHW haptic interface

Thursday, May 31st, 2012

Diego Spinola writes, "Here's a project I've just "completed" that I think you'll like, it's an OSHW haptic interface! It's called VIMPHIN and it's pictured in action above. Guess what logic sniffer I used to debug the actuator's bus?" Our money would be on the open workbench Logic Sniffer! For...

Tags: ,
Posted in code, open source, robotics | 1 Comment »

Open source hardware symbols for PCBs

Tuesday, February 15th, 2011

Here's a followup to the open source hardware logo post. NBitWonder has some of the design candidates in an open source eagle library. Thanks Ben! Via the comments.

Tags: , ,
Posted in documentation | No Comments »

Open Source Hardware Logo

Sunday, February 13th, 2011

The Open Hardware Summit has released Version 1.0 of the Open Source Hardware Definition (OSHW). With this definition they would like to release a logo to be used to brand Open Hardware. Criteria: The logo for the Open Hardware Definition must: * Be easy to print/see on a PCB *...

Tags: ,
Posted in documentation, News | 3 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please