Categories

Posts Tagged ‘AT Command Script’

Test script processor for the Bus Pirate

Tuesday, August 24th, 2010

Here's another use for the AT Command Script Processor we posted last week. We've been using to run test scripts on new Bus Pirate firmwares. Get a Bus Pirate v3b for $30, including worldwide shipping at Seeed Studio. Adafruit also has the Bus Pirate and probe cables in stock and...

Tags: ,
Posted in Bus Pirate, testing, utilities | No Comments »

AT command script processor for GSM modem debugging

Wednesday, August 18th, 2010

Last week we wrote some software for a GSM (cellular) modem module.  The GSM modem is controlled by AT commands, like an old landline modem. Debugging is usually done by typing AT commands into Hyperterminal or the Bus Pirate. We got tired of tapping out tons of AT commands by...

Tags: , ,
Posted in utilities | 21 Comments »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...