R-Pi based Volvo S80 replacement nav system

Posted on Wednesday, June 12th, 2013 in R-Pi by the machinegeek

Reinis has been working on this Raspberry Pi based project for some time.

It’s about replacing stock navigation system for Volvo S80 (which does not, and will not have maps for my home country). It had a nice motorized display and buttons on steering wheel for control. I really did want everything to be as close as stock as possible. It resulted in semi-usable navigation system, which replaces stock navigation unit in trunk- no wires running from trunk to dash- steering wheel buttons conveniently generated messages on CAN bus, which I connected to in trunk.

Reinis has posted links on his website to an overview of the project, summary of the hardware design, and his actual prototype hardware and in-car testing.

Via the contact form.

This entry was posted on Wednesday, June 12th, 2013 at 12:01 am and is filed under R-Pi. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!