Taco Crawl 2013 Thursday before Maker Faire

Posted on Wednesday, May 15th, 2013 in #liveupdates by Ian


Every year before Maker Faire we spend a day in San Francisco to visit the Noisebridge hackerspace, Instructables, and other open hardware/DIY/hacker friendly people. Noisebridge is located in a neighborhood called the Mission District, and it has dozens of delicious Mexican taco shops called taquerias. We try to eat a carne asada taco at every shop, but there’s so many it’s an impossible challenge.

If you’re in San Francisco for the Maker Faire early please join us for the Dangerous taco crawl from Noise Bridge hacker space through the Mission District on Thursday the 16th. We’ll meet at Noise Bridge near the 16th and Mission Street BART stop at about 6pm. If you can make it please give us a shout via the contact form.

Make gave us two free tickets for friends, we’re going to give them away at the taco crawl. If you don’t have tickets yet let us know on Thursday and we’ll give you our extras.

Route map below the fold. Hit us up on the contact for for a cell number if you want to track us down after the crawl is under way.


Note that Noisebridge is a block further south than the dot. It is actually printed on the map below our route highlight.

This entry was posted on Wednesday, May 15th, 2013 at 8:36 pm and is filed under #liveupdates. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Taco Crawl 2013 Thursday before Maker Faire”

  1. Anders says:

    I will be at a bar in Mission watching the NHL playoffs on Thursday. Any bar on the route that shows hockey? I was aiming for Kilowatt before I saw this.

  2. Jacques says:

    It should be Thursday the 16th or Friday the 17th no?

  3. Ian says:

    It is tonight. Thursday. Friday is setup for all the makers and the maker party.

  4. Bruce says:

    Would love to join in but I’m at Google IO until around 6::30 or so. Any idea where you’ll be around 7:30?

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Daniel: Do I comment here or on FB?
  • Craig B: Shouldn't the default be 00xxx010? Note that bit 0 appears out of order in the documentation. In that case I think the initial value is...
  • JJM: From the datasheet extract you are showing, the power up status should be 00xxx010, not 000xxx01. Bit numbering is misleading since 'measurement resolution' is apparently...
  • Jan Ciger (@janoc200): Hmm, that could actually explain why the three sensor IMU breakout I have bought a few years ago had all sorts of issues - I...
  • Travis: Is it preset to the windows 3 fingered salute?