chipKIT programming tutorials

Posted on Friday, March 15th, 2013 in site, tutorials by the machinegeek

EmbeddedLab has a series of chipKIT tutorials online. This series is excellent for MCU newbies and anyone unfamiliar with working with the chipKIT platform. Check them out!

This entry was posted on Friday, March 15th, 2013 at 2:00 pm and is filed under site, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “chipKIT programming tutorials”

  1. Pablo Garcia says:

    i have Radline RC car i took apart there 2 PCB 1 Blue PCB the Digital 49mhz the Green PCB is the Motor and servo control i want to use the Digital Receiver Blue PCB on my own Motor Control ( Max32 ) with SSR my project is to control a GoKart but i need to read the RXD Signal so my dev board can use it please i need help … thanks in advance

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!