Categories

RTL-SDR spectrum analyzer on the Beaglebone

Posted on Wednesday, February 20th, 2013 in dev boards, open source, RF, SDR by the machinegeek


Alexandru Csete, amateur radio operator OZ9AEC, has developed this spectrum analyzer running on a Beaglebone dev board. He calls the project the rtlizer, designed to be a simple real-time spectrum analyzer that uses an RTL2832U DVB-T receiver (RTL-SDR USB stick) and runs on a Beaglebone, or any other device with librtlsdr and Gtk+ installed.

You can find more details including a link to the rtlizer project code at Csete’s OZ9AEC website.

This entry was posted on Wednesday, February 20th, 2013 at 4:00 pm and is filed under dev boards, open source, RF, SDR. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...
  • Max: I have a suspicion the hefty electrolytic cap might be some sort of cargo cult carry-over from other RF-based projects - for instance, I've seen...