Categories

Nexus 7 dock teardown

Posted on Thursday, January 17th, 2013 in Android, Teardowns, Videos by the machinegeek


Anton Gorbunov did a teardown of his Nexus 7 dock and discovered that there are only some passive components on the PCB. He notes that with some pogopins it should be easy to make your own Dock.

Via the contact form.

This entry was posted on Thursday, January 17th, 2013 at 12:01 am and is filed under Android, Teardowns, Videos. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

8 Responses to “Nexus 7 dock teardown”

  1. Mike says:

    Needs a link :)

    I assume it’s this: http://www.youtube.com/watch?v=wXJvK5S_HLg

  2. Jay Wilkinson says:

    He talks too much. lol

  3. ken says:

    ok…where do we get the pogopins? And what’s the circuit? :-)

  4. Lawrence says:

    Sweet. This should be cloned and sold on ebay from sketchy chinese sellers in a heartbeat then :)

  5. The diameter of the Pins is 0.9mm in eBay you can find the P75 J1 or the P100 J1. OK this pogopins are long then from Asus.

  6. ken says:

    how do you hold the pogo pins in place? Looks like the pins on fleabay are just the pins :-P

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Bob: Jambalaya rocks.
  • KH: I should point out something... well, lead acid car batteries are designed to be well-charged all the time. The plates (which are patterned and thin)...
  • David Haile: You are a smart person and absolutely correct. That kind of current needs a lead acid car battery behind it. Still, it does have its...
  • KH: The solution discussed in the linked article is wrong. It's a largish Lipo (2500mAh) and he thinks 77uA is acceptable... ha ha ha ha ha....
  • Dave: I never had to opportunity to learn or use this stuff when I was in college (I'm sooo old that op-amps were just being developed...