Categories

I2C communications and Android applications

Posted on Friday, October 26th, 2012 in Android, code, data transfer by the machinegeek


Here’s an open source project by Dimitar Gamishev which demonstrates how to communicate using I2C in Android applications. As shown in this project Dimitar uses this code with an A13-OLinuXino running Android to drive relays and read ADCs and GPIOs on a connected MOD-IO board.

Tsvetan Usunov via the contact form.

This entry was posted on Friday, October 26th, 2012 at 2:00 pm and is filed under Android, code, data transfer. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “I2C communications and Android applications”

  1. Good to see someone found my Android I2C code useful :)

  2. Bharat says:

    Hi Dimitar Gamishev,
    I have a dragon410c board and it has i2c pins on that. Can I use your code to read or write i2c device data through those pins?
    What necessary modifications probably i need to do to existing code? Please guide me.

    Thanks and Regards,
    Bharat G

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: Nice - but I'm most interested in the enclosure with the finger-leaf cover. Where did that come from? How to buy more?
  • Dave B: Got two of them. If you let the battery run flat, they don't charge! You have to pull the battery, and get enough charge in...
  • Bill F: My turn?
  • Chris: Ok!
  • Bob: Free PCB for me!