Categories

GNU Radio internals – how to use the framework

Posted on Monday, September 17th, 2012 in open source, SDR, software by the machinegeek


The availability of inexpensive SDR hardware such as the RTL-SDR and Funcube Dongle help to focus interest on the GNU Radio open source signal processing software. In this video from CCC Camp 2011 Marius Ciepluch delivers a case-study on how to analyze 802.15.4 (alias Zigbee) with USRPs on a real-time protocol (for send time verification, sniffing etc.). Marius attempts to explain the internals of DSP in simple terms for non-experts using demos analyzing ISM band signals.

This entry was posted on Monday, September 17th, 2012 at 5:15 pm and is filed under open source, SDR, software. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: So Romanians use old ICs too, a bit reminiscent of Dilshan's projects. I'm vaguely disappointed by the liberal use of float data and float calculations....
  • Max: This is of course no "0-30V" supply - the single-supply standard LM723 schematic can't go all the way down to zero, which is why I...
  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • Olav Storstrøm: Please add 9-pin D-sub RJ45 and RJ12 connectors! Thanks!
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...