MMA7455L accelerometer free PCB build

Posted on Wednesday, September 21st, 2011 in builds by Ian

Piotr built a free MMA7455L accelerometer breakout board.

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Get the MMA7455L breakout board for $15 at Seeed Studio.

This entry was posted on Wednesday, September 21st, 2011 at 6:26 am and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “MMA7455L accelerometer free PCB build”

  1. mathison says:

    As well as not knowing the directional axis, would you as a selector circuit to alow easy of use with 5v microcontrolers.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: The LM7171 used in this very simple design can be simulated in LTspice with reasonable results at 10MHz using the non-encrypted PSPICE model from TI...
  • Jon Jackson: I would be interested in 1 or 2 of your circuit boards. Jon
  • Max: An actual Saturday "detector" built with the same hardware would use the precisely timed slightly varying length of the day (and some built-in astronomy data)...
  • KH: In the old days, these things remained on paper forever as whimsical scrawls. Today, they are brandished about on blogs for the entire world to...
  • KH: So he doesn't really know what he's doing. Yawn. It's sensor-controlled. It's not an oscillator. A leaf covers the window, you're toast. TLV3702? Overkill. The...