Categories

Free PCB Sunday: Bus Pirate PIC programming adapter

Posted on Monday, January 17th, 2011 in Free PCBs by Ian

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service.

This week we’re giving away two boards for the Bus Pirate PIC programming adapter. It provides a 13 volt source to put PIC 16F and 18F into programming mode. It is intended for the piratePICprog application, but it is still very much a work in progress. If you’d like a PCB just ask for one in the comments.

Now available to developers for $12 at Seeed Studio, read about the design on the wiki.

Are you interested in blogging with us? Drop us a line. This probably won’t be a paid position, but you get a back stage pass, free PCBs, and free projects. US and international bloggers are welcome.

Some stuff:

  • Yes, we’ll mail it anywhere in the world!
  • Be sure to use a real e-mail in the address field so we can contact you for shipping info.
  • First come, first serve. If we can’t contact the first commenters, or there’s no reply within 24 hours, we move down the list. You could consider making a request even if it looks like all the PCBs are gone.
  • Limit one PCB per address per month please.
  • Like everything else on this site, PCBs are offered without warranty.

We try to stagger free PCB Sunday posts so every time zone has a chance to participate, but the best way to see the post first is to subscribe to the RSS feed.

This entry was posted on Monday, January 17th, 2011 at 7:56 am and is filed under Free PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

17 Responses to “Free PCB Sunday: Bus Pirate PIC programming adapter”

  1. Chiva says:

    Hi, I would like one

  2. Bruce Gentle says:

    yes please

  3. scanboostar says:

    I love DangerousPrototypes !

  4. Jesper says:

    Yes please

  5. greeeg says:

    too late, I would have liked one :D

  6. Stendall says:

    Hi Ian, can I have one?
    Thanks for the BP.

  7. Gary says:

    Hi!! I would like one!

  8. ElectricGuy says:

    I want one, please.

  9. Adam says:

    I vant one!

  10. HWmayer says:

    Can I have one, please ?

  11. jeanyves says:

    certainly too late but yes I would like it too !

  12. Segfault says:

    I wouldn’t mind one. Thanks.

  13. Arnd Gronenberg says:

    I would be glad to receive one!

  14. GWDeveloper says:

    Hope I’m not too late on this one.

  15. Steve says:

    I’d love one, cheers. Although looking at it it’s unlikely!

  16. Randy says:

    I would like one. This would go well with the Bus Pirate I made from scratch, on perfboard.

  17. Brian says:

    I’m guessing I’m way late, but I’d love one as well please!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please