Categories

DIY clamp helps with surface mount soldering

Posted on Wednesday, December 15th, 2010 in skills, tools by Ian

Hold surface mount parts in place while you solder with this ingenious improvised component clamp.

Via Hack a Day.

This entry was posted on Wednesday, December 15th, 2010 at 1:21 pm and is filed under skills, tools. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...