Skip to main content
Topic: Dangerous Soldering Iron driver V1.5(based on Arhi's gen3) (Read 190776 times) previous topic - next topic


Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #242
how's that "patrick's" board? The schematic is made by me and pcb is made by arakis (filip)?

as for connecting it, connect common pin and one of the button pins to ground
connect A and B from encoder to E1 and E2 (if the rotation in firmware is contrary to what you expect change E1 and E2) and connect the other button pin to EB



Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #245
Here I'm!
I'm starting build this project!
Greetings from Italy

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #246
for pic programming should I use a parallel programmer find in fox delta site?
Thanks!

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #247
Hello,  i order board from Speed Studio and asamble with all parts but i do ot know how to connect the 2x16 LCD to the board. Witch pin go to witch pin on board?

I have this LCD (JHD162G)

i have this pin

1   2   3   4   5   6   7   8   9   1   11   12   13   14   15   16
Vss   VDD   V0   RS   R/W   E   DB0   DB1   DB2   DB3   DB4   DB5   DB6   DB7   LEDA   LEDK

Also please help with pic18F2550 i have flash the file SID_GEN4.X.production.hex is this correct file?

And do i need to flash some other IC on the board?

Sorry for so much question but i am reading this forums for days and cannot find answer.

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #248
i connected LCD but i have only this at screen.
[attachment=0]

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #249
Hello to all

I have one noob question about capacitors and sorry for my bad english and some mistakes.
I need some information for capacitors voltage. Some capacitors are explained, but the other still not sure what the minimum voltage required to support. Here I put a list, so if someone can write that voltage.

C1, C2, C3, C15, C23
C5, C6
C7-C21, C25 (C25 is twice mentioned in the list, C17 = 50V)
C13

That is all.

Please help and thanks.

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #250
[quote author="dolino"]Hello to all

I have one noob question about capacitors and sorry for my bad english and some mistakes.
I need some information for capacitors voltage. Some capacitors are explained, but the other still not sure what the minimum voltage required to support. Here I put a list, so if someone can write that voltage.

C1, C2, C3, C15, C23
C5, C6
C7-C21, C25 (C25 is twice mentioned in the list, C17 = 50V)
C13

That is all.

Please help and thanks.[/quote]

I think that maximum voltage that can be is 25-30V
small  ceramic capacitor that i use is 50V like this
http://http://www.aliexpress.com/item/100pcs-lot-Multilayer-ceramic-capacitor-1uF-105-50V-1000nF-105M/32455164152.html?ws_ab_test=searchweb201556_9_79_78_77_80%2Csearchweb201644_5%2Csearchweb201560_6&spm=2114.01020208.3.11.ltYWYB

 

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Reply #251
Great, thank you