Skip to main content
Topic: missing? pins (Read 4102 times) previous topic - next topic

missing? pins


i have the pirate laying around for some time. now i want to flash a hr20e using jtag. the pinout mentioned ( vcc and reset are missing... which are those pins on the pirate?


Re: missing? pins

Reply #1
Hi murpf,

You can check this post which is related to the Bus Pirate using JTAG.

The author left out vcc connection for he's using the target's power as stand alone, but I can't find where he connects the Reset :(


Re: missing? pins

Reply #2
EDIT: I did some more research and found that the TRST pin should be connected to PGD (the pin on the programming header).

Re: missing? pins

Reply #3
Great. Thanks for the tip!