Dangerous Prototypes

Dangerous Prototypes => Bus Pirate Support => AVRDude => Topic started by: 0000 on July 28, 2014, 07:31:57 pm

Title: Bus Pirate + avrdude issue
Post by: 0000 on July 28, 2014, 07:31:57 pm
Hi,

avrdude always gets stuck at 99% when i try to read the flash memory:
Code: [Select]
$ avrdude -p c128 -c buspirate -P /dev/ttyUSB0 -U flash:r:hello.hex:i

Attempting to initiate BusPirate binary mode...
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9781
avrdude: reading flash memory:

Reading | ################################################## | 99% 150.50sBusPirate: Paged Read command returned zero.

Here is my buspirate information:
Code: [Select]
Bus Pirate v3.5
Firmware v6.2-beta1 r1981  Bootloader v4.4

And I'm using avrdude 6.1.
Title: Re: Bus Pirate + avrdude issue
Post by: Trax on June 28, 2015, 06:30:43 pm
I have the same problem any sollutions?