This worked the first try and is giving me the data I need.
I like the way it turned out
i also found this one most others in stock are slightly over 6 amps im finding.
this is what is needed.
You are welcome.
For what I know, you could use the utility named PicBaud.exe attached:
I state that in any case you will not be able to get the exact Baud Rate you wish, but only approach its value as much as possible , cause limitations in the UART implemented in the PIC24 used on the Bus Pirate.
You have to run PicBaud.exe setting it for PIC24 and 32MHz clock.
Enter the desired baud rate 460800bps and hit calculate, then use the value from the BRGH=1 section.
For 460800bps enter 8 at the Bus Pirate BRG prompt. (command "b" in HiZ).
Please, take a look at these links:
Be seeing you.
first is there a real need for a 12/24v dual trans
for the 5.2 version of the pcb, a transformer is needed with one output at 24v 6A 130W.
Thanks for any help.