Guillo: Android Accessory Development kit
From DP
| Guillo: Android Accessory Development kit | |
|---|---|
| Codename | Guillo |
| Status | [[Project status#|]] |
| Development | [ development forum] |
| ID # | 12 |
Contents |
Prototypes
Downloads
- Android Accessory Development kit source r1653 v1b
- Location in SVN: \DP_Andriod_Accessory_Development_Kit
Resources
Forum links, datasheets, app notes, etc.
Latest Schematic
Early Schematic
Latest PCB
- V1 - PIC footprint too large (wrong pitch)
Early PCB
Partlist
| Part | Quantity | Value | Package |
|---|---|---|---|
| C1,C2,C3,C4,C5,C6,C16,C18 | 8 | 0.1uF | C603 |
| C7,C15,C17 | 3 | 10uF | SMC_A |
| C8 | 1 | 220uF | CASE_A |
| C9 | 1 | 1uF | C603 |
| C10 | 1 | 0.01uF | C603 |
| C11,C12 | 2 | 33pF | C603 |
| C13,C14 | 2 | 12pF | C603 |
| D1,D2 | 2 | DO323 | |
| D3 | 1 | ES2D | SMB |
| F1 | 1 | 0.75A | 0805_PTC |
| H1,H2,H3,H4 | 4 | MOUNT-PAD-ROUND3.3 | 3,3-PAD |
| IC3 | 1 | TQFP100 | |
| ICSP | 1 | HEADER_PRG_PIC_ICSPB | HEADER_PRG_1X05_ICSP_B |
| JP1,JP2 | 2 | 1X12-S | |
| JP3,JP4 | 2 | 1X08-S | |
| JP5,JP6 | 2 | 1X06-S | |
| LED1,LED2,LED3,LED4,LED5,LED6,LED7,LED8,PWR | 9 | LED | LED-805 |
| R1,R3,R4,R7,R8,R9,R10 | 7 | 10K | R603 |
| R2 | 1 | 200R | R603 |
| R5 | 1 | 10k | TRIMMER_3362P |
| R6,R11,R12,R13,R14,R15,R16,R17,R18,R19,R20,R21,R22,R25 | 14 | 470R | R603 |
| R23 | 1 | 0R | R603 |
| R24 | 1 | No Load | R603 |
| RST,SW2,SW3,SW4,SW5 | 5 | TACT_SWITCH_SMALL | |
| U$2 | 1 | POWER_JACKSMD | POWER_JACK_SMD |
| USB | 1 | CON-USB-MINI-BUSB1 | CONN_USB_MINI-B |
| VR1 | 1 | LD1117-5.0 | DPAK |
| VR2 | 1 | SOT223 | |
| XTAL1 | 1 | 8MHz | HC-49U |
| XTAL2 | 1 | 32.768Khz | TC-26 |
License
- Hardware: CC-BY-SA
- Firmware: CC-BY-SA
- Bootloader: GPL V3.0
- Software: CC-0