Daft Punk table controller
From DP
Contents |
Overview
The goal of this project was to make an Arduino-based Daft Punk table controller. It reads animations from an SD card and plays them on a large 5x5 LED grid. Animations can be made and downloaded online.
We've made several different driver for our Daft Punk table in the past:
- SD card Daft Punk table at Instructables
- Internet graffiti wall at Hack a Day (ethernet/web enabled)
This design may still be produced. Either as a through-hole kit, or a different SMD version.
Downloads
Schematic
PCB
Click for a full size placement image.
| Part | Quantity | Value | Package |
|---|---|---|---|
| C1-C12 | 10 | C025-025X050 | |
| C2 | 1 | E2,5-6E | |
| C17,C18 | 2 | 22pF | C2.5-3 |
| IC1,IC3,IC5,IC7 | 4 | 74HC595N | DIL16 |
| IC2,IC4,IC6,IC8 | 4 | DIL18 | |
| IC10 | 1 | ATMEGA328P | DIL28-N |
| J1 | 1 | SPC4078 | |
| JP1 | 1 | 1X06 | |
| Q1 | 1 | 16MHZ | HC49/S |
| U$1 | 1 | SD_CARD_SOCKETSD | SD-MMC_SOCKET-PP |
| VLED-X16 | 17 | W237-102 | |
| VREG1 | 1 | LD1117-3.3 | TO220-V |