Categories

Posts Tagged ‘spectrum analyzer’

Tektronix Interview | RSA306 Spectrum Analyzer

Wednesday, November 18th, 2015

KF5OBS interviews Matt Maxwell, a product marketing Manager for Tektronix, about their RSA306 USB real time spectrum analyzer.

Tags: ,
Posted in interviews | No Comments »

Spectrum analysis with RFM12B

Tuesday, November 17th, 2015

Martin Harizanov writes, "The comments to my last blog post got me thinking if I had chosen the right RFM channel at home, obviously if the channel is noisy that directly affects reception and increases the error rates. I use the default 868Mhz setting for the RFM12B/RFM69s at home and decided...

Tags: ,
Posted in wireless | No Comments »

Software Spectrum Analyzer for the Rigol 1000 series oscilloscopes

Tuesday, September 22nd, 2015

rheslip writes: I came up with this idea after seeing Farhan Ashar's spectrum analyzer design which uses some of the same bits and pieces I used in the Simple Scalar Network Analyzer. Farhan's is a classic heterodyne SA design - the addition of mixers and filters in front of the...

Tags: ,
Posted in oscilloscope, software | 1 Comment »

Specan, a reboot of the W7ZOI/K7TAU spectrum analyzer

Thursday, August 27th, 2015

Ashhar Farhan blogged about his spectrum analyzer build: The Specan is actually a very simple but robustly built receiver. it is, in essence, a double conversion superhet receiver with 112 Mhz and 12 Mhz Intermediate frequencies. The first mixer uses an Si570 as the local oscillator. The second oscillator is...

Tags: ,
Posted in DIY | No Comments »

Tektronix RSA306 IF frequency verification

Thursday, November 13th, 2014

KF5OBS writes: After posting the teardown video of the Tektronix RSA306 USB 3.0 Spectrum Analyzer on my YouTube channel, someone asked me to verify that the IF sampled by the Linear Technology 14-Bit / 125 Msps ADC is really at 140 MHz. Using the Tektronix MDO4104B-6 and a passive RF...

Tags: ,
Posted in measurement, testing | No Comments »

Modularized homebrew spectrum analyzer

Monday, May 12th, 2014

Mathias Weyland writes, I'm building a homebrew spectrum analyzer (based on an existing project) and while doing so, I used the Open Bench Logic Sniffer to test my logic board. I have documented my attempts here; the Logic Analyzer part starts around minute 21. The video makes most sense in...

Tags:
Posted in builds, logic analyzer, project logs | No Comments »

RTL-SDR wide spectrum analyzer

Saturday, March 15th, 2014

Claudio Giuliani has designed an RTL-SDR based wide spectrum analyzer. The code is available on AlterVista. Software prerequisites are a Linux box (no Windows/OSX version) with Gnuradio and rtl_sdr utilities installed. The spectrum analyzer program is a frontend GUI of rtl_power for spectrum visualization and control and is coded in...

Tags: ,
Posted in code, open source, RF, SDR | 2 Comments »

Measuring filter response using a noise source

Thursday, January 30th, 2014

KF5OBS writes: If you own a spectrum analyzer with tracking generator or, even better, a good vector network analyzer, measuring the frequency response of a filter is fairly easy. But there is one old approach using a noise source that can turn any oscilloscope with a FFT spectrum view into...

Tags: ,
Posted in measurement | 2 Comments »

RTL-SDR spectrum analyzer on the Beaglebone

Wednesday, February 20th, 2013

Alexandru Csete, amateur radio operator OZ9AEC, has developed this spectrum analyzer running on a Beaglebone dev board. He calls the project the rtlizer, designed to be a simple real-time spectrum analyzer that uses an RTL2832U DVB-T receiver (RTL-SDR USB stick) and runs on a Beaglebone, or any other device with...

Tags: , ,
Posted in dev boards, open source, RF, SDR | No Comments »

TI debuts sub-GHz CC430 based spectrum analyzer

Thursday, December 8th, 2011

video platformvideo managementvideo solutionsvideo player TI has introduced a sub-GHz spectrum analyzer using the SA430 chip. Known as the MSP-SA430-SUB1GHZ, the CC430 microcontroller that the SA430 is based on is a highly integrated system-on-chip featuring an on-board sub-GHz radio chip based on the CC1101. As TI describes it: The MSP-SA430-SUB1GHZ...

Tags:
Posted in MSP430, RF, tools | 4 Comments »

AVR VU meter and spectrum analyser

Friday, January 28th, 2011

senso posted an AVR VU meter and spectrum analyzer in our new project log section of the forum. I'm here to show my on-going project, its a little VU meter and spectrum analyzer that I made using an op-amp, an Arduino and a 16x2 char lcd. Via the forum.

Tags: ,
Posted in AVR | 7 Comments »

MSP430 based RF spectrum analyzer

Monday, November 29th, 2010

Here's a well documented RF spectrum analyzer project by

Tags: , ,
Posted in builds, MSP430, tools | 2 Comments »

Arduino realtime audio spectrum analyzer

Wednesday, November 24th, 2010

Paul Bishop has posted source code and the schematic for an audio spectrum analyzer based on the Atmega328/Arduino. The design takes input from a simple electret microphone, amplifies it through a transistor fed into the Arduino's ADC input pin. The Arduino outputs video of  a 64 band audio spectrum analyzer...

Tags: , ,
Posted in Arduino, tools | 1 Comment »

Recent Comments

  • Paul Campbell: I'm old enough that I started programming with punched cards .... each card had a sequence number in the last few characters. A friend once...
  • Ian: test comment on /blog/ page
  • ian: No, that's exactly how it should be :) Sorry about missing names on comments, the theme is being reworked as we speak.
  • J. Peterson: Nice writeup. It looks like some of the formatting for your command examples needs some missing newlines?
  • Geert Jordaens: I'm not sure what kind of licensing I have to add since it is a fairly straight forward implementation of the adaptive Huffman Decoding. For...