Posts Tagged ‘robot’

Windows 10 IoT core controlling a Raspberry Pi 2 robot

Friday, August 21st, 2015

Windows 10 IoT Core running a Raspberry Pi 2 robot by Scott Hanselman: Starting with a Raspberry Pi 2, walk through the setup instructions here. You do need to have a Windows 10 today to installing Windows 10 IoT Core but at least it's gotten a lot easier with the...

Tags: , ,
Posted in R-Pi, robotics | No Comments »

Mearm forked

Monday, August 17th, 2015

Bajdi's self designed version of the mearm using 3 stepper motors: Since I was not very happy with the original design I decided to make my own version. Goal was to make it much simpler to print, less pieces that don’t need to be so accurate to fit together. I...

Tags: , ,
Posted in 3D Model, Arduino, robotics | No Comments »

Matchbox car

Wednesday, August 12th, 2015

Shane has been working on making small robots and made a prototype of a matchbox car,  a robot car that fits inside a matchbox: This build consists of a tiny DC motors ripped from a pair of 9g servos, a h-bridge motor controller, an el-cheapo 8 bit pic and a...

Tags: ,
Posted in robotics | No Comments »

InLinea01: A PID controlled line following robot build on an ATmega 8

Wednesday, June 3rd, 2015

Davide Gironi made a PID controlled line following robot: InLinea01 is a simple PID controlled line following robot. This is not speed oriented line follower, this is just a prototype I built to experiment with this type or machines, though it can be the first step to build a faster one....

Tags: , ,
Posted in robotics | 1 Comment »

Miniature machine controlled by heat and electromagnetic fields: TermiNature

Tuesday, June 2nd, 2015

A Miniature Origami Robot by MIT and TU Munich researchers: The unfolded robot, which is made of a magnet and PVC sandwiched between laser-cut structural layers (polystyrene or paper), weighs just 0.31 g and measures 1.7 cm on a side. Once placed on a heating element, the PVC contracts, and...

Posted in robotics | No Comments »

DIY soldering robot

Wednesday, May 6th, 2015

Here’s Brian Dorey's completed project the DIY soldering robot project. We wrote about it previously: The DIY soldering robot which we have been building in our spare time over the past few months is now working and we have been able to solder some test Raspberry Pi expansion board headers with...

Tags: ,
Posted in DIY | No Comments »

Foobot, a robot table football game

Tuesday, March 17th, 2015

Steve of mooplog has been working on a robot table football game called Foobot: My DIY robot table football game, using some super cheap 433mhz radio modules, some AVR microcontrollers (attiny2313 and attiny13) and classic Nintendo and Sega controllers to reignite the console wars... Project info at mooplog site. Check out the video after the break....

Tags: ,
Posted in DIY, robotics | 1 Comment »

Soldering robot – Head assembly

Monday, March 16th, 2015

Brian Dorey published a new build, a soldering robot project: We have finished the soldering iron element slider system and stepper mount for the new soldering robot project. The soldering iron element slides on a pair or 6mm rails, drylin® accessories, precision aluminium shaft 100mm length (part no: AWMP-06) with drylin®...

Tags: , ,
Posted in robotics | No Comments »

DirtyPCB Pico-Kubik quadruped robot 

Friday, February 13th, 2015

Pico-Kubik, the tinniest quadruped robot with Micropython on board by Radomir Dopieralski: This is the fourth quadruped that I'm building, after Kubik, µKubik, and Nano-Kubik. This one literally fits in the palm of your hand (you can see it next to a LEGO brick on the photo). It's going to run...

Tags: , ,
Posted in, robotics | No Comments »

3D printable robot arm

Monday, January 19th, 2015

Andreas Hölldorfer of ChaozLabs has written up documentation on his 3D printable robot arm:  It is inspired by well known industrial robots but 3D printed. The overall goal is to build a nearly entirely printable and cheap robot arm with at least 5 degrees of freedom. Check out the videos...

Tags: ,
Posted in 3D fabrication, robotics | 2 Comments »

Beer Pong robot

Thursday, January 8th, 2015

Here's a cool VERSABALL Beer Pong robot by Empire Robotics: The core principle behind VERSABALL is the jamming phase transition of granular materials. The green ball is filled with a sand like material. When air is pumped into the ball, the ball softens. The ball is then pushed against the target...

Posted in robotics | No Comments »

MorpHex MKIII, the transforming robot

Tuesday, October 21st, 2014

Here's a cool hexapod robot that transforms into a ball shape - the MorpHex by Kåre Halvorsen:  I've done a lot of work on MorpHex lately, both on hardware and software. The two major updates;  24 Starlite RGB LED's and a Razor 9DOF IMU made a huge difference when it comes to control and...

Tags: ,
Posted in robotics | 1 Comment »

Introducing Bo & Yana – robots helping kids learn to code

Friday, August 29th, 2014

Two of the guys working on this pass through Shenzhen regularly, no end to the cool stuff going on around here: Play possibilities are endless A pusher bar to clean up your room, or an arm to present a flower to a friend — there are many accessories to give...

Posted in robotics | No Comments »

Wireless controlled robotic hand

Friday, June 27th, 2014

Gabry295 wrote this Instructable detailing the build of his wireless controlled robotic hand: It consists in an artificial hand controlled by a glove with flex sensors. The artificial hand reproduces the movements of the hand with the control glove. The hand and the glove works both with Arduino. Check out the video after the...

Tags: , ,
Posted in Arduino, robotics | No Comments »

Bipedal walking sentinel project

Thursday, June 26th, 2014

A bipedal walking robot by Ye Guan: The robot will have a complete compliment of sensors to help it understand its surrounding and its own condition. The current design uses a total of seven sensors.  For external obstacle avoidance there is a sonar sensor to detect long range surroundings, and an inferred distance...

Tags: ,
Posted in robotics | No Comments »

KMel Robotics flying robots play instruments

Thursday, April 24th, 2014

KMel Robotics flying robots that can play instruments: Just a reminder about how this all works: each one of these robots has its position measured down to the millimeter (or better) at a very high frequency using an external localization system. The individual hexrotors themselves are being centrally controlled by...

Posted in robotics | 1 Comment »

Autonomous iPad playing robot

Tuesday, February 18th, 2014

Tom Randle made this robot that automatically plays Leap Sheep on the iPad: On a complete whim about 2 years ago, I decided to make a robot to autonomously play one of my favourite iPhone games: Leap Sheep. The game's nice and simple so lends itself really well to automation. Sheep...

Tags: ,
Posted in robotics | 1 Comment »

Autopilot MEMs robot

Monday, December 16th, 2013

Arduino compass bearing following robot: When you don’t want to drive your robot wouldn’t it be nice to just point in a direction and have it go there? Well the issue is that every little bump and wheel drag will slowly adjust the direction so where it ends up after...

Tags: , ,
Posted in robotics | No Comments »

Poppy, an open-source humanoid robot

Monday, October 21st, 2013

Poppy project open source robot debuts from France: Poppy is an Open-source humanoid platform based on robust, flexible, easy-to-use hardware and software. Designed by the Flowers Lab at Inria Bordeaux and Ensta ParisTech (France), its development aims at providing an affordable and hackable humanoid robot for science, education, art and...

Tags: ,
Posted in open source, robotics | 3 Comments »

SARRRO – Ultrasonic anti-collision robot build

Friday, August 9th, 2013

 Ultrasonic anti-collision robot by Gavin Hannah: I’ve also coined a name for my project. SARRRO, which stands for Search & Rescue Reconnaissance Rover.  I’ve updated the site title to reflect this.  From now on, I will be referring to my project as SARRRO rather than just “project” as I have been doing. Via Hacked...

Tags: ,
Posted in robotics | No Comments »

Next Page »

Recent Comments

  • Paul Campbell: I'm old enough that I started programming with punched cards .... each card had a sequence number in the last few characters. A friend once...
  • Ian: test comment on /blog/ page
  • ian: No, that's exactly how it should be :) Sorry about missing names on comments, the theme is being reworked as we speak.
  • J. Peterson: Nice writeup. It looks like some of the formatting for your command examples needs some missing newlines?
  • Geert Jordaens: I'm not sure what kind of licensing I have to add since it is a fairly straight forward implementation of the adaptive Huffman Decoding. For...