Categories

Posts Tagged ‘Arduino Uno’

2.2 or 2.4 or 2.8 inch SPI TFT LCD ILI9341 to Arduino Uno

Tuesday, July 28th, 2015

Bob Davis  has written an article on interfacing a 2.8 inch SPI TFT LCD ILI9341 with the Arduino Uno: Over the weekend I figured out how to interface a 2.8 inch SPI TFT that has a ILI9341 chip to an Arduino Uno.  All it takes is eight 1K resistors.  Most...

Tags:
Posted in Arduino, Interface | No Comments »

AD9850 DDS VFO

Wednesday, March 25th, 2015

Richard Visokey of AD7C made a DDS VFO using AD9850 and an Arduino Uno: I built a simple VFO for a direct conversion receiver I am putting together. The VFO uses an AD9850 DDS chip to synthesis a nice 1Vp-p sinusoidal wave. I used an Arduino Uno to set the AD9850...

Tags: , ,
Posted in Arduino, hacks | 2 Comments »

Arduino Uno R3 graphics accelerator shield uses no pins

Tuesday, February 24th, 2015

Andy Brown has written an article detailing his Arduino graphics accelerator open source project: This project brings together the knowledge that I’ve gained over the last few years to bring you a graphics accelerator for the Arduino Uno R3 based on an ARM Cortex M0 core attached to a 640×360 LCD...

Tags: , ,
Posted in Arduino | 12 Comments »

DIY lithium battery charger shield for Arduino

Thursday, November 13th, 2014

Abdulgafur Mujdeci over at Electro-Labs has published a new project a DIY lithium battery charger shield for Arduino: In this project, we are building a programmable single/multi cell lithium battery charger shield for Arduino. The shield provides LCD and button interface which let the user set the battery cut-off voltage from 2V to...

Tags: , ,
Posted in Arduino, DIY | 2 Comments »

Introducing CT-UNO, Cytron version of Arduino UNO

Tuesday, November 11th, 2014

Vincent informs us of this Arduino compatible CT-UNO, the Cytron version of Arduino UNO: The CT-UNO combines the simplicity of the UNO’s Optiboot bootloader (which load program faster), the stability of the FTDI and the R3 shield compatibility of the latest Arduino UNO R3.   Besides, we know many are using Android phone which...

Tags:
Posted in Arduino | 8 Comments »

Measure RPM – DIY portable digital tachometer

Wednesday, September 17th, 2014

Electro18 posted a tutorial on how to make a portable digital optical tachometer using an Arduino Uno,  an instructable here: A tachometer is a device used to measure the RPM or Revolutions Per Minute of any rotating body. Tachometers can be contact based or non-contact ones. The non-contact or contact-less optical tachometers...

Tags: , ,
Posted in Arduino, DIY | 1 Comment »

Hard disk drive clock with Arduino Uno

Tuesday, September 9th, 2014

ACVoltage  wrote this instructable detailing his DIY POV clock using hard disk drive and Arduino Uno: This is a fun project that can be done easily and also cheaply. In this instructable we will explain step by step how to make this beautiful POV clock. Used material: -Arduino Uno, -Tiny RTC modul, -ULN 2003,...

Tags: , ,
Posted in clock, DIY | No Comments »

Arduino GPS map navigation system

Wednesday, August 20th, 2014

Kathy Yang of Elecfreaks writes: Built on the basis of Arduino UNO, GPS, SD card, TFT, GPS map navigation system is to obtain the real-time position information via GPS, to send it to UNO for calculation, according to the calculating results, and teamed up with the map file stored in...

Tags: , ,
Posted in project logs | No Comments »

DIY stroboscope

Monday, August 11th, 2014

ReturnZero published a stroboscope build: At its heart, a stroboscope is just a rectangular wave generator hooked up to a light source. I wanted a few extra features to make it nice to use: Ability to set flash rate by either frequency or RPM Set duty cycle of output without...

Tags: , ,
Posted in Arduino, DIY | No Comments »

DIY cardboard laser piano

Tuesday, July 1st, 2014

Here's a cool DIY cardboard laser piano by ElecFreaks: Hi Guys, today, ElecFreaks will show you a guide how to make a cardboard laser piano by yourself. By this way, I think you do not only could make piano , you can transform a table , a window or a wall to be...

Tags: , ,
Posted in Arduino, DIY, tutorials | No Comments »

Arduino clock generator + divider experiment

Monday, June 16th, 2014

[embed]http://www.youtube.com/watch?v=T863DeV31MM[/embed] John Slee writes: Anyway, I decided to try to make my own clock divider. Didn't take long to get something working, and you can see the results in the video above. The genuine Arduino Uno is generating a simple square wave on pin 13, which you can observe with...

Tags: ,
Posted in clock | 1 Comment »

K4S, a keyboard for Arduino to use with Scratch

Friday, February 28th, 2014

Jechavarria writes: Here's my las project, in collaboration with the blog www.desafioecuador.org. It's a keyboard board to mount in Arduino UNO board that allows work with S4A, a mod of Scratch to use with Arduino. I hope you like it! Via the forum.

Tags: ,
Posted in Arduino | No Comments »

Car proximity v2

Thursday, January 2nd, 2014

Bithead writes: The transceiver I created for the original solution was based on an Arduino Uno with an Xbee shield. I put the assembly inside a Sparkfun Arduino Project Enclosure which measures 87x64x28mm. This has worked well for about 1.5 years now, but there is room for improvement: 1. I’d...

Tags: ,
Posted in Arduino | No Comments »

LineBot project

Wednesday, July 31st, 2013

A followup to the line-follower robot post, the LineBot project by bithead942: LineBot leverages an Arduino Uno which helps to decrease the complexity.  I also used an Ardumoto shield for motor control (I’ll pre-solder the headers and screw terms).  Using these will help accelerate the build since it means fewer...

Tags: , ,
Posted in DIY, robotics | No Comments »

Arduino Uno 3 million samples per second logic analyzer

Tuesday, June 25th, 2013

Bob Davis has built an Arduino powered three Million samples per second six channel logic analyzer: In the video below you can see what the live display looks like. He is using a 74 series decade counter to divide down a 10Mhz crystal so that he has some nice fast...

Tags: ,
Posted in Arduino | 2 Comments »

Arduino Uno quality control

Monday, October 4th, 2010

Moogle was disappointed by his new Arduino Uno. He thought it was pretty unrefined: rough edges, thin solder mask, poorly aligned headers. Arduino responded directly that this is an isolated incident. They will replace any less than perfect hardware. (A Moogle followup post) Additionally, bongobat may have encountered a major...

Tags: , ,
Posted in Arduino | 10 Comments »

Recent Comments

  • Sjaak: I would add some more protection in the used trigger file (on the serverpilot site) then not using a standard name :) hopefully they use...
  • Pete Castagna: My friend Charlie who worked in synthesizers at a DOD type of place made a modification to this avalanche pulse generator that allowed him to...
  • Sam Catchpole: Yes please :D
  • Giovambattista Matera: another try
  • rumburack: jes