parts and PCB's for the the
cnc controller that's in the works:
- IC's, resistors, caps, etc
an approximately list of parts bought, all source through digikey:
3 620-1352-1-ND IC DRIVER MICROSTEPPING 24-TSSOP
10 TC33X-104ECT-ND TRIMMER 100K OHM 0.1W SMD
2 296-12111-1-ND IC MUX/DEMUX TRIPLE 2X1 16TSSOP
4 277-1721-ND CONN TERM BLOCK T/H 2POS 3.5MM
2 PIC16F1826-I/SS-ND IC PIC MCU FLASH 2K 20-SSOP
20 CRM2512-FX-R100ELFCT-ND RES .100 OHM 2W 1% 2512 SMD
50 587-1287-1-ND CAP CER 0.22UF 50V 10% X7R 0805
100 311-1.74KCRCT-ND RES 1.74K OHM 1/8W 1% 0805 SMD
100 311-2.00KCRCT-ND RES 2.00K OHM 1/8W 1% 0805 SMD
100 311-4.99KCRCT-ND RES 4.99K OHM 1/8W 1% 0805 SMD
100 A106054CT-ND RES 10.0K OHM 1/8W 1% 0805
100 A106052CT-ND RES 100K OHM 1/8W 1% 0805
100 311-200KCRCT-ND RES 200K OHM 1/8W 1% 0805 SMD
100 311-499CRCT-ND RES 499 OHM 1/8W 1% 0805 SMD
100 311-825CRCT-ND RES 825 OHM 1/8W 1% 0805 SMD
2 IFX27001TF V50INCT-ND IC REG LDO 5V 1A TO252-3
2 609-4006-ND DSUB R/A US 25POS PIN
100 A106066CT-ND RES 0.0 OHM 1/8W JUMPER 0805
100 490-1666-1-ND CAP CER 0.1UF 50V 10% X7R 0805
100 490-1664-1-ND CAP CER 10000PF 50V 10% X7R 0805
20 475-1407-1-ND LED CHIPLED 570NM GREEN 1206 SMD
10 475-1416-1-ND LED CHIPLED 645NM RED DIFF 1206
10 WM4200-ND CONN HEADER 2POS .100 VERT TIN
10 311-1460-1-ND CAP CER 10UF 10V 10% X5R 0805
10 493-1107-ND CAP ALUM 100UF 50V 20% RADIAL
10 B0520WS-FDICT-ND DIODE SCHOTTKY 20V 0.5A SOD323
2 296-1196-1-ND IC BUFF/DVR TRI-ST DUAL 20SOIC
(that list is tab separated if you're extra curious and want to throw it into a spreadsheet to make it readable)
PCB's sourced from
Hackvana
- PCB order from Hackvana