SMT700 New vision based SMT machine from SMALLSMT

Reflow ovens, hot plates, pick and place machines, test rigs, solder stencils. Small scale manufacturing and prototyping tool discussion.

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Fri Feb 12, 2016 5:12 pm

Hi,
try to use a suction cup made from silicone this may fix your problem.
I saw the machine in Quihe office last year and the vision system had problems with ambient light changes.
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby slavka012 » Sat Feb 13, 2016 12:22 pm

Where do you get those? This machine accepts Juki nozzles, and Juki does not have silicon nozzles. I was thinking about putting a short piece of rubber tube onto the nozzle.
slavka012
Newbie
Newbie
 
Posts: 9
Joined: Mon Jan 04, 2016 12:37 pm

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby slavka012 » Sat Feb 13, 2016 12:24 pm

Also, certain 0805 caps are not reliably held by the nozzle. As the head moves the caps randomly move about from the vibration.
slavka012
Newbie
Newbie
 
Posts: 9
Joined: Mon Jan 04, 2016 12:37 pm

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Sun Feb 14, 2016 10:52 am

I think a small silicone tube will help you cut a piece using a sharp knife.

I found some on Ebay Germany you will find in your country too.

http://www.ebay.de/itm/2-Meter-Silikonschlauch-Silikon-Schlauch-Druckschlauch-hochflexibel-Grosen-2-8mm-/261746527579?var=&hash=item3cf14f0d5b:m:mcPGagplXBy1yVnBMvJRSsA
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Sun Feb 14, 2016 10:55 am

Also, certain 0805 caps are not reliably held by the nozzle. As the head moves the caps randomly move about from the vibration.


That's mostly a vibration problem you need to try on different speed to find the best result.
I had the same problem on my TM240 the vibration was up to 60% speed ok.

I don't know the Quihe software but I think you can define different speed for any part so try to decrease the speed for the caps.
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby slavka012 » Sun Feb 14, 2016 7:37 pm

I'm running it at 60% speed. It looks like at vibration is even worse at slower speeds.
slavka012
Newbie
Newbie
 
Posts: 9
Joined: Mon Jan 04, 2016 12:37 pm

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Mon Feb 15, 2016 7:46 am

Did you check the belt tension?
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Tue Jul 03, 2018 7:59 am

End of next month we release a new machine called VP-2800HP-CL64.

It has 64 CL feeder slots and 35x8mm push feeder. You can add 2 vibration feeder an North and one on South side.
We use new HD USB bootom cameras and double precision ball screw spindle.
Y axis has double linear guide line for high stablity.
The working area is bigger than 600x400mm.

We offer double with 6 slot nozzle changer and quad head version without nozzle changer.
Image
Image
Image
Image
Image
Image
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Re: SMT700 New vision based SMT machine from SMALLSMT

Postby supertronic » Thu Sep 13, 2018 6:21 am

Visit us on Maker Faire Hannover this week!
We show VP-2800HP-CL64 plus Qihe TVM925 and our new PCB inspection system.
supertronic
Full Member
Full Member
 
Posts: 118
Joined: Tue Mar 05, 2013 5:56 am
Location: germany

Previous

Return to Tools of the trade