Microscope for SMD rework

A place to document your own projects.

Microscope for SMD rework

Postby octal » Sun Dec 18, 2016 1:24 pm

I'm trying to build a microscope for SMD rework. My idea is to use a small low cost Raspberry Pi to make a full HDMI self contained microscope.
I used a Raspberry Pi camera on which I only exchanged the camera lens with a lens coming from DIYINHK lens. Their lens has the advantage of being focused to give you a working distance of about 15cm between the lens and the target board.

The camera I used is this one (I exchanged the lens as explained)
http://www.ebay.com/itm/New-Camera-Modu ... Sw9IpXzXRR

Here are first results (images took using my smartphone, I could have saved images directly on the raspberry tought). I tried to move a screw driver near small parts to mimic a soldering iron movements, and with a scene perfectly illuminated, at only about 24 fps, I don't notice any image bluring.
While I think this solution can give a nice HDMI microscope for hobbits, I really hated the fact that this "digital" microsocope don't give me the depth sensation. I'm accostumed to the work sterio microscope.

NB. I didn't fixed the camera firmly on a handler, so the images are not 100% perfectly focused, when I was doing my trials, I could have really better images than those. I'll try to make a clean setup on true modular handler and will publish better photos in upcoming days.
Sr. Member
Sr. Member
Posts: 300
Joined: Mon Apr 12, 2010 10:46 am
Location: France

Re: Microscope for SMD rework

Postby protonoob » Wed Feb 22, 2017 6:35 am

How is this project coming along, i am interested
Posts: 13
Joined: Tue Oct 28, 2014 2:49 am

Return to Project logs