Temperature alarm for boiling milk

A place to document your own projects.

Temperature alarm for boiling milk

Postby matematik7 » Sun Nov 27, 2016 10:55 am

Anyone who has ever boiled milk on the stove knows, that it has a nasty habit of overflowing. That is why I created the temperature alarm for boiling milk to be used my mother.
The temperature alarm uses attiny841 microcontroller and DS18B20 to continuously measure the temperature of the milk and sounds an alarm when the temperature is over the preset alarm value.
I’ve designed the pcb in KiCAD, etched the pcb at home and soldered it together.
The case is made from 4mm plywood and the buttons are small pieces of wooden rod glued to a square piece of plywood so they can not fall out.
Attachments
image2-resized.jpg
matematik7
Newbie
Newbie
 
Posts: 3
Joined: Sun Nov 27, 2016 10:48 am

Re: Temperature alarm for boiling milk

Postby matematik7 » Mon Nov 28, 2016 1:57 pm

And here is a link for more information: https://domen.ipavec.net/en/temperature-alarm/
matematik7
Newbie
Newbie
 
Posts: 3
Joined: Sun Nov 27, 2016 10:48 am


Return to Project logs

cron