USB PIC18F2550 and PIC18F25K50 board

A place to document your own projects.

USB PIC18F2550 and PIC18F25K50 board

Postby octal » Wed Nov 09, 2016 7:23 pm

I built and assembled a small prototyping board for PIC18F2550/PIC18F25K50. The PCB has been produced by SeeedStudio (excellent results), and I assembled first prototype by hand (quickly).
The board can be plugged directly on a breadboard, can be programmed using any PIC programmer via the 5 pin header.
Almost all pins are exposed, and I added two jumpers to make it possible to physically connect/disconnect two LEDs on PIC pins.
Another jumper provide the possibility to pull-down one pin in order to trigger the USB bootloader (if you prefer avoid an external programmer).

I didn't assembled the crystal on my board because I'm trying PIC18F25K50, and I want to check the possibility to do USB using internal crystal only.
I'll post the whole project, schematics and gerbers, and example souce codes (using Microchip C, Swordfish Basic) in few days.

Here some photos of the board
Attachments
20161110_005152.jpg
20161110_004703.jpg
20161110_004609.jpg
20161110_010140.jpg
20161110_010125.jpg
octal
Sr. Member
Sr. Member
 
Posts: 290
Joined: Mon Apr 12, 2010 10:46 am
Location: France

Re: USB PIC18F2550 and PIC18F25K50 board

Postby linusfreak » Thu Nov 10, 2016 8:47 pm

very simple yet an excellent project, useful for prototyping on breadboards, which is important for hobbyists. I believe your work represents a starting point for plenty of people who are willing to learn PIC USB using C.
linusfreak
Newbie
Newbie
 
Posts: 1
Joined: Thu Nov 10, 2016 8:41 pm


Return to Project logs