900M/T12/JBC + heat gun soldering controller

A place to document your own projects.

Re: 900M/T12/JBC + heat gun soldering controller

Postby projector42 » Mon Dec 25, 2017 3:29 am

schematics update
Attachments
sch.pdf
(60.9 KiB) Downloaded 15 times
sch.png
projector42
Jr. Member
Jr. Member
 
Posts: 55
Joined: Sat Aug 13, 2016 4:20 am
Location: Kergudu

Re: 900M/T12/JBC + heat gun soldering controller

Postby Contemplator » Mon Dec 25, 2017 6:59 am

Use external sensorTC1047A. Sensor output connects to PA4 on 3-channel controller. Firmware Nov 24, 2017. What are the values of corTcold and setTcold that must be selected for the operation of an external temperature sensor?
Contemplator
Newbie
Newbie
 
Posts: 9
Joined: Sun Feb 26, 2017 2:52 am

Re: 900M/T12/JBC + heat gun soldering controller

Postby projector42 » Mon Dec 25, 2017 11:49 am

to use internal/external sensor: setTcold=0 , external sensor detection is automatic
projector42
Jr. Member
Jr. Member
 
Posts: 55
Joined: Sat Aug 13, 2016 4:20 am
Location: Kergudu

Re: 900M/T12/JBC + heat gun soldering controller

Postby projector42 » Mon Jan 15, 2018 9:12 am

added support for iron tilt/reed/mercury switch: irTiltSw=1 (connects instead or in series with on/off switch), irTmr sets iron switch-off time on switch inactivity
Attachments
irfan-f030-01.zip
(44.2 KiB) Downloaded 1 time
manual_en.pdf
(45.46 KiB) Downloaded 1 time
projector42
Jr. Member
Jr. Member
 
Posts: 55
Joined: Sat Aug 13, 2016 4:20 am
Location: Kergudu

Previous

Return to Project logs