Really universal soldering controller

A place to document your own projects.

Re: Really universal soldering controller

Postby Swiety » Mon Mar 05, 2018 12:14 pm

Thanks.
I want to use T245 or it`s substitute specifically.
As I can see here -
https://www.eevblog.com/forum/reviews/j ... sassembly/
It is not complicated design, so I beleive this one
https://item.taobao.com/item.htm?spm=a1 ... 0986480118
or this one
https://item.taobao.com/item.htm?spm=20 ... b77de6f964
With original JBC cartridges may work as good, as genuine one.

Stand is different thing. I will use this one for sure
https://item.taobao.com/item.htm?spm=a1 ... 0ii97sdd1e
Yet I can see what kind of connector does it use. Vulkan posted this photo
https://itmages.ru/image/view/6394658/95ec1fcf
but still, there is no info about connector. I would like to have the same connector connected to PCB of station, so I can plug this stand directly.

minkok wrote:
Swiety wrote:Hey,
About this stand from TaoBao. I can`t find any connector in BOM for it. Did any of You have specified connector which would be suitable for it?


If you want to use Uni Solder as universal soldering station you have to tight to sparkybg's BOM and use 8 pin connector at least,
https://www.aliexpress.com/item/1set-lo ... e6d8bffd95
and if you are going to use only specified JBC iron handle, you can use 3 pin connector and the rest of connections to leave them inside of the box, but wire them properly.
You can see some wiring at page 114. All is at your choice and convenience.


afedorov thanks for the models!

UPDATE
3D models doesn`t work for me. Files are corrupted.
Swiety
Newbie
Newbie
 
Posts: 26
Joined: Thu Mar 01, 2018 4:03 pm
Location: Poland

Re: Really universal soldering controller

Postby afedorov » Mon Mar 05, 2018 6:18 pm

Swiety wrote:UPDATE
3D models doesn`t work for me. Files are corrupted.

What CAD system do you use? STEP format is not the strictest, so there may be some incompatibilities. I've downloaded and checked the files in FreeCAD and GrabCAD and it's interprets pretty well.
afedorov
Full Member
Full Member
 
Posts: 187
Joined: Wed Mar 23, 2016 8:44 am
Location: Russia

Re: Really universal soldering controller

Postby vulkan35 » Mon Mar 05, 2018 9:18 pm

Swiety wrote:or this one https://item.taobao.com/item.htm?spm=20 ... b77de6f964
With original JBC cartridges may work as good, as genuine one.


or this one 100MHZ JBC T245

Image Image

Swiety wrote:but still, there is no info about connector. I would like to have the same connector connected to PCB of station, so I can plug this stand directly.


Image Image

Silicone cable 4.8mm 3-wire.

Image Image Image
vulkan35
Newbie
Newbie
 
Posts: 27
Joined: Sat Jan 13, 2018 12:46 am
Location: Russia

Re: Really universal soldering controller

Postby Swiety » Tue Mar 06, 2018 3:58 am

Hey,
3D models worked. It was my system fault. Thanks once more.

Yup, that cable will do the job. Thank You.
I still consider getting non genuine T245 handle. The price is really tempting.
Swiety
Newbie
Newbie
 
Posts: 26
Joined: Thu Mar 01, 2018 4:03 pm
Location: Poland

Re: Really universal soldering controller

Postby minkok » Wed Mar 07, 2018 12:29 am

Swiety wrote:I still consider getting non genuine T245 handle. The price is really tempting.

Hy Swiety, I ordered DI3000 and one tip from there, I couldn't resist also on the price and may be in a month I will have some idea for the quality of the stuff if I get them. But from what I can see from pics, they are good stuff, but let's wait.
minkok
Full Member
Full Member
 
Posts: 149
Joined: Wed Jun 21, 2017 11:54 pm

Re: Really universal soldering controller

Postby puzzle » Wed Mar 07, 2018 4:42 am

@ Swiety:
Here is the original JBC part for T245 handle.
I used it in one of my stations built and it works with original JBC handle.

https://store.comet.bg/en/CatalogueFarn ... ct/977100/
You could search TME.eu for the manufacturer part number - they may have it also.
I'm a newbie at electronics and for that always take my words with a grain of salt - it is very possible I'm wrong!
puzzle
Newbie
Newbie
 
Posts: 47
Joined: Tue Feb 21, 2017 7:52 am

Re: Really universal soldering controller

Postby Swiety » Wed Mar 07, 2018 8:09 am

Thank You!

Btw, I still consider making my own stand.
Do You know if Sleep/Sensor PCB parts are included in BOM?

UDPATE
Sorry guys. I am asking too much dumb questions. I found all necessary information in the topic.
Swiety
Newbie
Newbie
 
Posts: 26
Joined: Thu Mar 01, 2018 4:03 pm
Location: Poland

Re: Really universal soldering controller

Postby Swiety » Sun Mar 11, 2018 12:27 pm

dumitruv wrote:
puzzle wrote:@hotdoc:
For me 0,96in OLED is totally enough - sparkybg made the temp number quite large so it is fine for its purpose. biggest issue is that you cant find it easy enough.


You can find both .96" and 1.3" here

https://www.buydisplay.com/
https://www.buydisplay.com/default/data ... e-on-black
https://www.buydisplay.com/default/seri ... e-on-black

Very serious vendor in my opinion, selling on ebay as well.


Hey,
Have You tried this OLED? Is it working correctly?

Mat
Swiety
Newbie
Newbie
 
Posts: 26
Joined: Thu Mar 01, 2018 4:03 pm
Location: Poland

Re: Really universal soldering controller

Postby Tony » Sun Mar 11, 2018 12:42 pm

Hey Swiety
See Allegro, ART Nowy OLED 128x64 3V SSD1306 I2C SPI 1,3cala

Tony
Tony
Newbie
Newbie
 
Posts: 16
Joined: Sun Mar 11, 2018 12:04 pm

Re: Really universal soldering controller

Postby Swiety » Sun Mar 11, 2018 2:20 pm

Thanks. I will look into it.

Tony have You tried this OLED? Are You sure that it will work?
Swiety
Newbie
Newbie
 
Posts: 26
Joined: Thu Mar 01, 2018 4:03 pm
Location: Poland

Re: Really universal soldering controller

Postby Tony » Sun Mar 11, 2018 3:38 pm

Swiety wrote:Thanks. I will look into it.

Tony have You tried this OLED? Are You sure that it will work?


Buydisplay is on SSD1306, with Allegro also has SSD1306. I have not tried yet.
Tony
Newbie
Newbie
 
Posts: 16
Joined: Sun Mar 11, 2018 12:04 pm

Re: Really universal soldering controller

Postby vulkan35 » Mon Mar 12, 2018 1:00 am

1.3 OLED White UG-2864KSWLG01 SSD1306, supply voltage display 12V.

Image Image
vulkan35
Newbie
Newbie
 
Posts: 27
Joined: Sat Jan 13, 2018 12:46 am
Location: Russia

Re: Really universal soldering controller

Postby dumitruv » Mon Mar 12, 2018 7:32 am

Swiety wrote:
dumitruv wrote:
puzzle wrote:@hotdoc:
For me 0,96in OLED is totally enough - sparkybg made the temp number quite large so it is fine for its purpose. biggest issue is that you cant find it easy enough.


You can find both .96" and 1.3" here

https://www.buydisplay.com/
https://www.buydisplay.com/default/data ... e-on-black
https://www.buydisplay.com/default/seri ... e-on-black

Very serious vendor in my opinion, selling on ebay as well.


Hey,
Have You tried this OLED? Is it working correctly?

Mat


I tried the 1.3" one and it works well.
dumitruv
Jr. Member
Jr. Member
 
Posts: 54
Joined: Fri Nov 20, 2015 6:07 am

Re: Really universal soldering controller

Postby svilens » Mon Mar 12, 2018 2:55 pm

I have an extra PCB of the Soldering station controller and 4 kits of the sensor.

If any one is interested - drop me a private message.

IMG_1909.jpg
IMG_1908.jpg
svilens
Newbie
Newbie
 
Posts: 2
Joined: Thu Dec 22, 2016 1:10 pm

Re: Really universal soldering controller

Postby vulkan35 » Thu Mar 15, 2018 9:25 am

Unisolder 5.2 Taobao
Attachments
UniSolder 52_TAOBAO.zip
(16.09 KiB) Downloaded 259 times
vulkan35
Newbie
Newbie
 
Posts: 27
Joined: Sat Jan 13, 2018 12:46 am
Location: Russia

PreviousNext

Return to Project logs