Arria 10 FPGA

High-speed USB 2.0 JTAG debugger and flash programmer. V2 available now for $34.95.

Arria 10 FPGA

Postby sad » Wed Mar 14, 2018 9:30 am

Hi

I design a board with altera Arria 10 FPGA "10AX115N3F40I2SG" i can successfully program Fpga with altera bus blaster 2. Now I want to program board by using bus blaster V3, i tried a lot but failed to program it. Urjtag can not recognize the bsdl file. I download the bsdl file from altera website. Any help can be appreciated to pull me out from this problem thanks. I attached the urjtag command line image as well.

Regards
Sad
Attachments
urjatg_altera_arria10.jpg
sad
Newbie
Newbie
 
Posts: 3
Joined: Tue Mar 13, 2018 12:25 pm

Re: Arria 10 FPGA

Postby tayken » Thu Mar 15, 2018 9:57 am

Can you try BSDL path as
Code: Select all
C:\bsdl

This is running on Windows so maybe that is the problem. Take a look over here: http://dangerousprototypes.com/docs/Bus ... _to_urJTAG
User avatar
tayken
Developer
Developer
 
Posts: 1520
Joined: Sat Dec 12, 2009 10:58 am
Location: Tokyo, Japan

Re: Arria 10 FPGA

Postby sad » Thu Mar 15, 2018 10:18 am

Hi Tayken

I tried C:\bsdl but it did not work.
sad
Newbie
Newbie
 
Posts: 3
Joined: Tue Mar 13, 2018 12:25 pm

Re: Arria 10 FPGA

Postby sad » Tue Mar 20, 2018 5:40 am

bsdl_error.jpg


Hi

I managed to run bsdl file by putting bsdl file in c:/urjtag/data/altera i made a folder there with the name of FPGA and put the bsdl file inside. I also edit PARTS file in the folder to include my device. When i ran the detect command i have below errors can anyone help.
sad
Newbie
Newbie
 
Posts: 3
Joined: Tue Mar 13, 2018 12:25 pm

Re: Arria 10 FPGA

Postby tayken » Wed Mar 21, 2018 8:59 am

At this point this seems like a problem with urjtag, I would ask those folks. But it seems to me like you have to use the BSDL file generated by Quartus instead of the one downloaded from Altera, that maybe the problem: https://nhiphanlogic.wordpress.com/2014 ... eight-hal/
User avatar
tayken
Developer
Developer
 
Posts: 1520
Joined: Sat Dec 12, 2009 10:58 am
Location: Tokyo, Japan


Return to Bus Blaster JTAG debugger

cron