Questions about BB v4

High-speed USB 2.0 JTAG debugger and flash programmer. V2 available now for $34.95.

Questions about BB v4

Postby giovanni » Fri Sep 15, 2017 3:23 am

Dear all,

I would like to buy BBv4, but I have the following doubts:

1. is it compatible with Fedora?
2. does it work in combination with Vivado?

Thanks!
Giovanni
giovanni
Newbie
Newbie
 
Posts: 2
Joined: Thu Sep 14, 2017 3:24 am

Re: Questions about BB v4

Postby dpropicweb » Sat Sep 16, 2017 2:18 am

Google is your friend :)
dpropicweb
Sr. Member
Sr. Member
 
Posts: 331
Joined: Thu Apr 22, 2010 5:44 am
Location: The LAN Downunder

Re: Questions about BB v4

Postby giovanni » Mon Sep 18, 2017 1:22 am

Of course I have already googled those.
giovanni
Newbie
Newbie
 
Posts: 2
Joined: Thu Sep 14, 2017 3:24 am

Re: Questions about BB v4

Postby dpropicweb » Mon Sep 18, 2017 4:00 am

Then you know the answer? I did a quick Google and it was the second result on the page.
dpropicweb
Sr. Member
Sr. Member
 
Posts: 331
Joined: Thu Apr 22, 2010 5:44 am
Location: The LAN Downunder

Re: Questions about BB v4

Postby abcyient » Tue Dec 19, 2017 12:05 am

Hi AlL

I have parched BUS BLASTER 4.1a and try to connect the target device but getting message struck at 0/1

I did below steps

1.Download and install FTDI drivers for the FT2232 chip
2.Download and install UrJTAG -
3.connected BUS BLASTER 4.1a to PC via USB cable
4.opened Urjtag shell
5.checking JTAG connected
jtag> cable ft2232 interface=1
Connected to libftd2xx driver.
6.device connected to JATG
Jtag>detect
Warning- TDO seems to be struck at 0

Can I need to be update the CPLD logic or any thing else.

Can any on help me to resolve this issue.

Thanks
Abhay
abcyient
Newbie
Newbie
 
Posts: 1
Joined: Mon Dec 18, 2017 1:35 am


Return to Bus Blaster JTAG debugger