Is this a Bug?

[canghaiwuhen]

My Bus Pirate Update to Firmware 5.10,but I found some questions:

1. The "h" command cann't use.
2. The "}" command cann't use.
3. The "c/C" control CS pin ,but the dislpay is also AUX.

The Last,I'm a chinese user,my english is not good,so my words maybe speak wrong.
Please don't laugh me.
:-D

[ian]

Hi canghaiwuhen,

These should all work.

Please make sure you use 'h' and not 'H', but all other keys should work.

Maybe check the terminal emulation type (VT-102).

Also: you can try to update the firmware again in case something is wrong.

Please let me know, I will help the best I can.

[canghaiwuhen]

Hi ian,

'h' and 'H' are all cann't use,and all other keys is ok.

Termnal is work.

And I have update the firmware again,but it have the same questions.

1.jpg (7.25 KiB) Viewed 1806 times

2.jpg (12.93 KiB) Viewed 1806 times

3.jpg (9.96 KiB) Viewed 1806 times

[ian]

Ah, I understand now.

h was removed in 5.10. Now use up and down arrows to scroll through the history. That should be removed from the menu.

{} are only for use in UART and MIDI mode, else use []

The AUX seems to work, but the display is off. See this example:

Code: Select all

SPI>c
a/A/@ controls AUX pin
SPI>a
AUX LOW
SPI>i
Bus Pirate v3b
Firmware v5.10 (r559)  Bootloader v4.4
DEVID:0x0447 REVID:0x3042 (24FJ64GA002 B4)
http://dangerousprototypes.com
CFG1:0xF9DF CFG2:0x3F7F
*----------*
Pinstates:
1.(BR)  2.(RD)  3.(OR)  4.(YW)  5.(GN)  6.(BL)  7.(PU)  8.(GR)  9.(WT)  0.(Blk)
GND     3.3V    5.0V    ADC     VPU     AUX     CLK     MOSI    CS      MISO
P       P       P       I       I       O       O       O       O       I
GND     0.00V   0.00V   0.00V   0.00V   L       L       L       H       L
Power supplies OFF, Pull-up resistors OFF, Normal outputs (H=3.3v, L=GND)
MSB set: MOST sig bit first, Number of bits read/write: 8
a/A/@ controls AUX pin
SPI (spd ckp ske smp csl hiz)=( 1 0 1 0 1 0 )
*----------*
SPI>A
AUX HIGH
SPI>i
Bus Pirate v3b
Firmware v5.10 (r559)  Bootloader v4.4
DEVID:0x0447 REVID:0x3042 (24FJ64GA002 B4)
http://dangerousprototypes.com
CFG1:0xF9DF CFG2:0x3F7F
*----------*
Pinstates:
1.(BR)  2.(RD)  3.(OR)  4.(YW)  5.(GN)  6.(BL)  7.(PU)  8.(GR)  9.(WT)  0.(Blk)
GND     3.3V    5.0V    ADC     VPU     AUX     CLK     MOSI    CS      MISO
P       P       P       I       I       O       O       O       O       I
GND     0.00V   0.00V   0.00V   0.00V   H       L       L       H       L
Power supplies OFF, Pull-up resistors OFF, Normal outputs (H=3.3v, L=GND)
MSB set: MOST sig bit first, Number of bits read/write: 8
a/A/@ controls AUX pin
SPI (spd ckp ske smp csl hiz)=( 1 0 1 0 1 0 )
*----------*
SPI>C
a/A/@ controls CS pin
SPI>a
AUX LOW
SPI>i
Bus Pirate v3b
Firmware v5.10 (r559)  Bootloader v4.4
DEVID:0x0447 REVID:0x3042 (24FJ64GA002 B4)
http://dangerousprototypes.com
CFG1:0xF9DF CFG2:0x3F7F
*----------*
Pinstates:
1.(BR)  2.(RD)  3.(OR)  4.(YW)  5.(GN)  6.(BL)  7.(PU)  8.(GR)  9.(WT)  0.(Blk)
GND     3.3V    5.0V    ADC     VPU     AUX     CLK     MOSI    CS      MISO
P       P       P       I       I       O       O       O       O       I
GND     0.00V   0.00V   0.00V   0.00V   H       L       L       L       L
Power supplies OFF, Pull-up resistors OFF, Normal outputs (H=3.3v, L=GND)
MSB set: MOST sig bit first, Number of bits read/write: 8
a/A/@ controls CS pin
SPI (spd ckp ske smp csl hiz)=( 1 0 1 0 1 0 )
*----------*
SPI>A
AUX HIGH
SPI>i
Bus Pirate v3b
Firmware v5.10 (r559)  Bootloader v4.4
DEVID:0x0447 REVID:0x3042 (24FJ64GA002 B4)
http://dangerousprototypes.com
CFG1:0xF9DF CFG2:0x3F7F
*----------*
Pinstates:
1.(BR)  2.(RD)  3.(OR)  4.(YW)  5.(GN)  6.(BL)  7.(PU)  8.(GR)  9.(WT)  0.(Blk)
GND     3.3V    5.0V    ADC     VPU     AUX     CLK     MOSI    CS      MISO
P       P       P       I       I       O       O       O       O       I
GND     0.00V   0.00V   0.00V   0.00V   H       L       L       H       L
Power supplies OFF, Pull-up resistors OFF, Normal outputs (H=3.3v, L=GND)
MSB set: MOST sig bit first, Number of bits read/write: 8
a/A/@ controls CS pin
SPI (spd ckp ske smp csl hiz)=( 1 0 1 0 1 0 )
*----------*
SPI>

the AUX and CS respond correctly. That should be updated too.

Thanks for the bug reports!

Ian

[canghaiwuhen]

yeah,I know.

hehe, and bus pirate is so useful that I'm admire you.

And I'm writing a guide for chinese user.

O(∩_∩)O~

[ian]

That is fantastic, thank you. It would be great to see more Chinese users of the Bus Pirate.

Feel free to add it to our wiki, I think it will support all UNICODE characters.

[canghaiwuhen]

OK!

When I complete the guide,I should sent it to you.
But my job is busy,so it's not faster.
(*^__^*)

[canghaiwuhen]

Hello
I read the wiki and try all the use or Bus Pirate,but there are some use that I don't found in firmware 5.10,such as JTAG and PC Keyboard.

[ian]

Firmware got too big, so we made main and "extras". Extras has PC Keyboard and some others.

JTAG terminal mode is removed, only JTAG by OPENOCD is possible now.

[canghaiwuhen]

oh!
And how to enter the raw binary bitbang mode?
I'm trying the DIO mode~~
hehe,the guide will finished soon.

[ian]

send binary value 00 20 times to enter BBIO mode.

[canghaiwuhen]

Am I misunderstood your meaning?

Code: Select all

HiZ>00:20
WRITE: 0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here
0x00ERROR: command has no effect here

Syntax error at char 5
HiZ>

[Sjaak]

You need to send 20 times 0x00 to the buspirate.

http://dangerousprototypes.com/docs/Bitbang

[canghaiwuhen]

I have try to send it,but it have no result.

[canghaiwuhen]

And I found that the BASIC script can not control then pin.
What wrong with it?