Bus Pirate - Community Firmware 7.0

Bus Pirate firmware and hardware development.

Re: Bus Pirate - Community Firmware 7.0

Postby USBEprom » Sun Apr 16, 2017 5:54 am

Hi A340.
I know nothing about Ds30 Loader, sorry.
I use pirate-loader on Windows and it works without any problem.
Try it.
As attachment there is a pre configured environment that anyone can use with minimal changes.
Inside the archive are also provided instruction on how to use the whole thing.

Be seeing you.

U.Sb
Attachments
UPGRADE.zip
(130.7 KiB) Downloaded 56 times
USBEprom
Jr. Member
Jr. Member
 
Posts: 96
Joined: Wed Mar 14, 2012 4:09 pm

Re: Bus Pirate - Community Firmware 7.0

Postby A340 » Sun Apr 16, 2017 9:21 am

Hi USBEprom,

Thanks for the reply. I followed your instructions, as you wrote,and 7.1 loaded fine. (see Below). Thanks a lot, much appreciated. I will continue to follow this thread, as I move forward learning the Bus Pirate.

Bus Pirate v3.5
Community Firmware v7.1 - goo.gl/gCzQnW [HiZ 1-WIRE UART I2C SPI 2WIRE 3WIRE KEYB LCD PIC DIO] Bootloader v4.4
DEVID:0x0447 REVID:0x3046 (24FJ64GA00 2 B8)
http://dangerousprototypes.com
A340
Newbie
Newbie
 
Posts: 4
Joined: Sat Apr 01, 2017 11:28 pm

Re: Bus Pirate - Community Firmware 7.0

Postby USBEprom » Mon Apr 17, 2017 5:24 am

Hi A340.
That is fine.
Do you mind a question?
For your upgrade have you used the "SAFE" or the "UNSAFE" version?
It would be useful to know what hardware has problems with the "UNSAFE" version and what does not.
For what it is and without any warranty with my Bus Pirate it has not problems.
However by using the "UNSAFE" version anyone must to assume all the responsibility for his action.
Use it at your own risk, I do not take any responsibility about the possibility of damaging your Bus Pirate or whatever!
Just to be clear.
Thanks.

Be seeing you.

U.Sb
USBEprom
Jr. Member
Jr. Member
 
Posts: 96
Joined: Wed Mar 14, 2012 4:09 pm

Re: Bus Pirate - Community Firmware 7.0

Postby A340 » Mon Apr 17, 2017 11:25 am

Hi USBEprom,

I used "SAFE" version.

A340
A340
Newbie
Newbie
 
Posts: 4
Joined: Sat Apr 01, 2017 11:28 pm

Re: Bus Pirate - Community Firmware 7.0

Postby marsfan » Wed Apr 19, 2017 7:52 pm

@A340 I was told on the Github issue system that we have to use Pirate Loader, Ds30 is not supported by the community firmware.

@USBEprom, you should post/tag releases on the github page, might be easier than on this support thread.
marsfan
Newbie
Newbie
 
Posts: 3
Joined: Wed Apr 19, 2017 5:44 pm

Re: Bus Pirate - Community Firmware 7.0

Postby USBEprom » Thu Apr 20, 2017 1:19 pm

Hi marsfan.
I agree but, how?, where?
I know nothing about that, sorry.

Be seeing you.

U.Sb
USBEprom
Jr. Member
Jr. Member
 
Posts: 96
Joined: Wed Mar 14, 2012 4:09 pm

Re: Bus Pirate - Community Firmware 7.0

Postby marsfan » Mon Apr 24, 2017 9:12 pm

@USBEprom You would need to get the owner of the github repository to mark you as a contributor (not 100% sure how to do that), and then there is a way to create releases containing specific files. I know it can be done, because I have downloaded compiles programs via that before, you would need to talk with @agatti.

Here is a guide on creating releases: https://help.github.com/articles/creating-releases/
These guys use it a lot, and are pretty helpful, they might be able to help out with any questions if you need a person on hand: https://github.com/KSP-CKAN/CKAN.

I know that releases can be given tags. And I also know that you can use 3rd party systems like codeship and travis-ci to confirm builds will work, and they automatically generate new releases.
marsfan
Newbie
Newbie
 
Posts: 3
Joined: Wed Apr 19, 2017 5:44 pm

Re: Bus Pirate - Community Firmware 7.0

Postby USBEprom » Mon May 15, 2017 1:23 pm

Hi marsfan.
Sorry.
I do not understand a single word, too hard for me.
I give up, I will continue to put the new firmwares here.
I can not do anything else, sorry again.

Be seeing you.

U.Sb
USBEprom
Jr. Member
Jr. Member
 
Posts: 96
Joined: Wed Mar 14, 2012 4:09 pm

Previous

Return to Bus Pirate Development