Dangerous Soldering Iron driver V1.5(based on Arhi's gen3)

Hardware incubation. See also our in development projects wiki.

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby arhi » Thu Mar 26, 2015 3:19 pm

what patricks board?
User avatar
arhi
Hero Member
Hero Member
 
Posts: 2160
Joined: Thu Jun 24, 2010 11:41 am
Location: Belgrade, Serbia

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby lachmannmarcel » Tue Mar 31, 2015 11:34 pm

lachmannmarcel
Newbie
Newbie
 
Posts: 3
Joined: Thu Mar 26, 2015 1:10 pm

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby arhi » Wed Apr 01, 2015 6:04 am

how's that "patrick's" board? The schematic is made by me and pcb is made by arakis (filip)?

as for connecting it, connect common pin and one of the button pins to ground
connect A and B from encoder to E1 and E2 (if the rotation in firmware is contrary to what you expect change E1 and E2) and connect the other button pin to EB
User avatar
arhi
Hero Member
Hero Member
 
Posts: 2160
Joined: Thu Jun 24, 2010 11:41 am
Location: Belgrade, Serbia

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby lachmannmarcel » Wed Apr 01, 2015 8:24 am

my error
but from this page i presume that Patrick is the one who made the board.
http://dangerousprototypes.com/docs/Pat ... evelopment
Thank you for you help.
lachmannmarcel
Newbie
Newbie
 
Posts: 3
Joined: Thu Mar 26, 2015 1:10 pm

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby arhi » Wed Apr 01, 2015 8:30 am

don't remember, maybe "patrick" was the codename of dp's version of the sid at the time ..
User avatar
arhi
Hero Member
Hero Member
 
Posts: 2160
Joined: Thu Jun 24, 2010 11:41 am
Location: Belgrade, Serbia

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby nikarlo » Mon Nov 02, 2015 10:57 am

Here I'm!
I'm starting build this project!
Greetings from Italy
nikarlo
Newbie
Newbie
 
Posts: 2
Joined: Mon Nov 02, 2015 10:55 am

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby nikarlo » Tue Nov 03, 2015 8:49 am

for pic programming should I use a parallel programmer find in fox delta site?
Thanks!
nikarlo
Newbie
Newbie
 
Posts: 2
Joined: Mon Nov 02, 2015 10:55 am

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby rtstorm » Sun Nov 22, 2015 8:59 am

Hello, i order board from Speed Studio and asamble with all parts but i do ot know how to connect the 2x16 LCD to the board. Witch pin go to witch pin on board?

I have this LCD (JHD162G)

i have this pin

1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16
Vss VDD V0 RS R/W E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LEDA LEDK

Also please help with pic18F2550 i have flash the file SID_GEN4.X.production.hex is this correct file?

And do i need to flash some other IC on the board?

Sorry for so much question but i am reading this forums for days and cannot find answer.
rtstorm
Newbie
Newbie
 
Posts: 3
Joined: Sun Nov 22, 2015 8:44 am

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby rtstorm » Sun Nov 22, 2015 4:39 pm

i connected LCD but i have only this at screen.
IMG_3080.JPG
rtstorm
Newbie
Newbie
 
Posts: 3
Joined: Sun Nov 22, 2015 8:44 am

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby dolino » Mon Nov 23, 2015 2:56 pm

Hello to all

I have one noob question about capacitors and sorry for my bad english and some mistakes.
I need some information for capacitors voltage. Some capacitors are explained, but the other still not sure what the minimum voltage required to support. Here I put a list, so if someone can write that voltage.

C1, C2, C3, C15, C23
C5, C6
C7-C21, C25 (C25 is twice mentioned in the list, C17 = 50V)
C13

That is all.

Please help and thanks.
dolino
Newbie
Newbie
 
Posts: 2
Joined: Mon Nov 23, 2015 2:46 pm

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby rtstorm » Mon Nov 23, 2015 3:26 pm

dolino wrote:Hello to all

I have one noob question about capacitors and sorry for my bad english and some mistakes.
I need some information for capacitors voltage. Some capacitors are explained, but the other still not sure what the minimum voltage required to support. Here I put a list, so if someone can write that voltage.

C1, C2, C3, C15, C23
C5, C6
C7-C21, C25 (C25 is twice mentioned in the list, C17 = 50V)
C13

That is all.

Please help and thanks.


I think that maximum voltage that can be is 25-30V
small ceramic capacitor that i use is 50V like this
http://www.aliexpress.com/item/100pcs-lot-Multilayer-ceramic-capacitor-1uF-105-50V-1000nF-105M/32455164152.html?ws_ab_test=searchweb201556_9_79_78_77_80%2Csearchweb201644_5%2Csearchweb201560_6&spm=2114.01020208.3.11.ltYWYB
rtstorm
Newbie
Newbie
 
Posts: 3
Joined: Sun Nov 22, 2015 8:44 am

Re: Dangerous Soldering Iron driver V1.5(based on Arhi's gen

Postby dolino » Tue Nov 24, 2015 12:02 am

Great, thank you
dolino
Newbie
Newbie
 
Posts: 2
Joined: Mon Nov 23, 2015 2:46 pm

Previous

Return to Project development, ideas, and suggestions