Skip to main content
Topic: Checksum o CRC feature. (Read 933 times) previous topic - next topic

Checksum o CRC feature.

hi ppl.

Is it possibe to apply checksum or CRC, to the file that we get after a data capture with OLS, or after
protocol decoding?

I would use this feature, to compares integrity between to different files obtained  from the same device
with  matched triggering conditinos.

In this way we can get an practical way to compares a working firmware capture vs a supucious one.

Re: Checksum o CRC feature.

Reply #1
I found out that OLS cliente can produce .csv file output containing the sampled data.

Will try that path.