Skip to main content ↑ ↓
Topic: Routing close to the edge. (Read 1054 times) previous topic - next topic

Routing close to the edge.

I am thinking of making a 1.6mm board with a hole cut about 1mm from the edge.  The hole is a lozenge shape with about 10mm on the inside edge parallel with the outside edge.

Code: [Select]
_________________ Outside edge
    __________    <- 1mm of material
   / <-10mm-> 
  /            
      Hole    /

Does anyone on this forum like to look at random PCBs and guess if they would be accepted by dirtypcbs or not?  If I can iterate the design here it would save effort at the company (wherever it ends up).

Thanks.

Re: Routing close to the edge.

Reply #1 –
We have the cheapest, crappiest PCBs in the world. Don't press your luck. My guess is they will reject it. 1mm is crazy!
Got a question? Please ask in the forum for the fastest answers.

Re: Routing close to the edge.

Reply #2 –
1mm is not as crazy as me, but I take your point.  Thank you.