Re: Bus Pirate - Community Firmware 7.0 Reply #150 – February 19, 2021, 02:39:58 am Hi guys, since 2012 I bought the buspirate V3.5C and the buspirate V4.0Several times update the firmwares, but always return to firmware version v6.2-beta1 r1981.By mid-2018 I had loaded the bpv3_fw7.11_opt1_12062018.hex but then went back to v6.2-beta1 r1981.I have a pickit2 which I use from console with pk2cmd.I wonder if you could not include the bootloader and load the firmware directly with pickit2, for both buspirates.And what would be the current firmwares to test ... I would have to download a new mplabx, since I have the old mplabx 4.20 running on wineIn this state I am now with both buspirates.pickit2 identify to ICSP buspirate V3.5C$ pk2cmd -P -IAuto-Detect: Found part PIC24FJ64GA002.Device ID = 0447Revision = 3043Device Name = PIC24FJ64GA002Operation Succeeded$ ls -l /dev/ttyUSB0 crw-rw---- 1 root plugdev 188, 0 feb 18 19:52 /dev/ttyUSB0$ minicom -D /dev/ttyUSB0HiZ>iBus Pirate v3.5Firmware v6.2-beta1 r1981 Bootloader v4.4DEVID:0x0447 REVID:0x3043 (24FJ64GA002 B5)http://dangerousprototypes.comHiZ>m1. HiZ2. 1-WIRE3. UART4. I2C5. SPI6. 2WIRE7. 3WIRE8. LCDx. exit(without change)(1)>pickit2 identify to ICSP buspirate V4.0$ pk2cmd -P -IAuto-Detect: Found part PIC24FJ256GB106.Device ID = 1019Revision = 0003Device Name = PIC24FJ256GB106Operation Succeeded$ ls -l /dev/ttyACM0 crw-rw---- 1 root uucp 166, 0 feb 18 19:54 /dev/ttyACM0$ minicom -D /dev/ttyACM0HiZ>iBus Pirate v4Firmware v6.2-beta1 r1981 DEVID:0x1019 REVID:0x0003 (24FJ256GB106 A5)http://dangerousprototypes.comHiZ>m1. HiZ2. 1-WIRE3. UART4. I2C5. SPI6. 2WIRE7. 3WIRE8. KEYB9. LCD10. PIC11. DIOx. exit(without change)(1)>Greetings.