Skip to main content
Topic: Bus Pirate + avrdude issue (Read 2049 times) previous topic - next topic

Bus Pirate + avrdude issue

Hi,

avrdude always gets stuck at 99% when i try to read the flash memory:
Code: [Select]
$ avrdude -p c128 -c buspirate -P /dev/ttyUSB0 -U flash:r:hello.hex:i

Attempting to initiate BusPirate binary mode...
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9781
avrdude: reading flash memory:

Reading | ################################################## | 99% 150.50sBusPirate: Paged Read command returned zero.

Here is my buspirate information:
Code: [Select]
Bus Pirate v3.5
Firmware v6.2-beta1 r1981  Bootloader v4.4

And I'm using avrdude 6.1.

Re: Bus Pirate + avrdude issue

Reply #1
I have the same problem any sollutions?