Skip to main content
Topic: Cannot open the brd and sch files in svn trunk (Read 5216 times) previous topic - next topic

Cannot open the brd and sch files in svn trunk

i cannot open the brd and sch files of svn trunk in google code after downloading.
may be the problem with the browser in downloading.
how can i solve this ?


thank you

Re: Cannot open the brd and sch files in svn trunk

Reply #1
We are using Eagle version <6. Eagle v6 should read this no problem.

Try downloading the schematic and board using the 'download raw file' in the browser or a proper svn client.

Re: Cannot open the brd and sch files in svn trunk

Reply #2
I am using eagle 6

Re: Cannot open the brd and sch files in svn trunk

Reply #3
Hi varunme, what project are you trying to download in the svn?

Re: Cannot open the brd and sch files in svn trunk

Reply #4
I think its a problem when trying to download with browser , when i used tortoise its got fine it think

Re: Cannot open the brd and sch files in svn trunk

Reply #5
Yes, its working now, thank for the support guys !

Re: Cannot open the brd and sch files in svn trunk

Reply #6
Hallo ,

How stabil is the +5V rail of the ATX PSU to be feed into uC in regards of taking ADC measurement.
Since i will be using internal Vref for ADC measurement.

p/s:Has anyone tried to use the breakout board for stepper motor?

Re: Cannot open the brd and sch files in svn trunk

Reply #7
The 5v rail is pretty stable (when using the 10w resistor). The quality of the line is depending on the psu. But use plenty of caps on your board will not hurt you.