Yet another DIY Bus Pirate case January 23, 2010, 08:03:12 am Here is something I cooked up a while as a case for my BP v2.go. Its a DV tape case. The inside is 46mm x 68mm so it would fit a v3 as well.The board is fixed to the bottom with a double layer of double sided tape. The cut outs were just done with a scalpel as the material is quite soft. Last Edit: January 01, 1970, 01:00:00 am by Guest
Re: Yet another DIY Bus Pirate case Reply #1 – January 23, 2010, 08:37:18 am Hi Gatsu,Great case! I'll post it today.If you upgrade to bootloader v4, watch out with the jumper in the 'normal' position. It also triggers the bootloader after the upgrade on v2go. Last Edit: January 01, 1970, 01:00:00 am by Guest
Re: Yet another DIY Bus Pirate case Reply #2 – February 01, 2010, 02:38:45 am Great case. Looks like one of my DV tapes is going to have to go naked. Last Edit: January 01, 1970, 01:00:00 am by Guest
Topic: Yet another DIY Bus Pirate case (Read 1741 times)
previous topic - next topic
Open Source Hardware