Skip to main content
Topic: Bus blaster v4 (Read 59 times) previous topic - next topic

Bus blaster v4

I have the following routers

1. wrt54g v1
2. wrt54g v2.2
3. dir 615 E3

ALl of these have headers and all pins and jtag pins were identified and checked with  a jtagulator.

The issue I have is when I try to detect the router the router hangs after the detect operation I tried windows and linux , the chip is detected but hangs right after please let me know what I need to check., I am using urjtag

cable jtagkey vid=0x0403 pid=0x6010 interface=0

jtag> detect
IR length: 8
Chain length: 1
Device Id: 00010100011100010010000101111111 (0x1471217F)
  Manufacturer: Broadcom (0x17F)
  Part(0):      BCM4712 (0x4712)
  Stepping:     Ver 1
  Filename:     /usr/share/urjtag/broadcom/bcm4712/bcm4712