Skip to main content
Topic: Bus pirate V4 connection problem windows 7. (Read 494 times) previous topic - next topic

Bus pirate V4 connection problem windows 7.

Hello, recently I made a Bus pirate V4 , I soldered components , and I uploaded both bootloader and firmware respectively , I also installed INF file , in device manager I've got an Error 10 msg .
when I plugged Bus pirate to my computer which has windows 7 on it , I see no msg or notification, nothing happened at all, even I'm sure that I programmed it correctelly.
Why I have this Error 10 "device can't start" ?    (I'm sorry my windows is french one)
Please help me.
Regards.


Re: Bus pirate V4 connection problem windows 7.

Reply #1
I want jus to note that USB led is on all the time whenever bus pirate v4 is plugged to my laptop.
best regards .

Re: Bus pirate V4 connection problem windows 7.

Reply #2
After brushing into the bootloader of package_latest_18092016, the BPV4 I made could not recognize the device through USB connection to PC, nor could it obtain the COM port.

Re: Bus pirate V4 connection problem windows 7.

Reply #3
Does it get recognized in bootloader mode? Did you flash the firmware via a programmer or the bootloader?