Skip to main content
Topic: Maxim DS2431 (Read 753 times) previous topic - next topic

Maxim DS2431

Hi Friends

Just wondering if this is infact encrypted when I try search this the Device Id is weird. This is what I get

1-WIRE>(240)                                                                   
SEARCH (0xF0)                                                                  
Macro     1WIRE address                                                        
 1.- ä a Ê    ü                                                                
   *DS2431 1K EEPROM                                                           
Device IDs are available by MACRO, see (0).                                    
                                                                               
1-WIRE>    

the screenshot is below. Can anyone point me in the right direction?

Re: Maxim DS2431

Reply #1
Hi  Ben100000.
There you should read hexadecimal numbers, whether they are encrypted or plaintext.
X
Maybe you have problems with connections to the DS2431 chip, or you have omitted something in the configuration of your Bus Pirate.
Did you enabled PULL-UPs on your Bus Pirate?
On your Bus Pirate are you using the STANDARD or OVERDRIVE speed?
Which revision of the Bus Pirate are you using, 3 or 4?
What firmware does your Bus Pirate have?
Thanks.

Be seeing you.

U.Sb

Re: Maxim DS2431

Reply #2
@Ben100000.

...and how is the output type set on the Bus Pirate (command "o" [1 HEX / 2. DEC / 3. BIN / 4. RAW])?
Thanks.

Be seeing you.

U.Sb