Skip to main content
Topic: FTDI EEPROM Default (Read 117 times) previous topic - next topic

FTDI EEPROM Default

Hi,
it seems I bricked my bus blaster. Urjtag keeps on complaining that tdo is stuck at 1 when trying to program the onbard CPLD. I already excanged the CPLD and the FTDI chip but it didnt help. I found out via FT_Prog that the ft232h chip is blank.
Can anybody please send me his/her eeprom content so I can write the data to my bus blaster?

I own the bus blaster 4.1a and try to program the onboard cpld with urjtag:

->cable jtagkey
->detect

thank you very much in advance,

AK

Re: FTDI EEPROM Default

Reply #1
I have this problem also. New Bus Blaster v3 from Seeed Studios with a blank EEPROM. If I cannot find a solution then I have a brick.