Skip to main content
Topic: Brick Bus Pirate V3.6 (Read 134 times) previous topic - next topic

Brick Bus Pirate V3.6

Hello,

I have the BP v.3.6 that I have no communication with, because I have loaded the firmware v6.1 with bootloader v2.
I understand that I will have to charge everything through the PICKIT, right?
Tell me what correct version I have to put firmware and bootloader to my BP.

This is the PICKIT manual. Is he the one who would have to follow?
http://dangerousprototypes.com/docs/Bus_Pirate_v4_and_Pickit2_(bootloader_and_firmware_updates)

Thank you.

Re: Brick Bus Pirate V3.6

Reply #1
In the git repository there is a manufacturing resources folder. That has a complete bootloader plus firmware you can program. However, I don't believe any 3.6 had bootloader 2, that was 3 or 3.1. are you sure it's bricked?
Got a question? Please ask in the forum for the fastest answers.

 

Re: Brick Bus Pirate V3.6

Reply #2
In the git repository there is a manufacturing resources folder. That has a complete bootloader plus firmware you can program. However, I don't believe any 3.6 had bootloader 2, that was 3 or 3.1. are you sure it's bricked?

Well I deduce that this brick, because when I access the terminal does not give me the bootloader version, even if I make the bridge in pins. Anyway, what are the files (bootloader and firmware) that you indicate to me and that correct version IAN.

If you could help me relive it, I would appreciate it.

Thank you.


Re: Brick Bus Pirate V3.6

Reply #4
I have to follow these steps, right?

Connect 5 pins from pickit 2 to the pirate bus

Finally use these commands:

  • ./pk2cmd / PPIC24FJ256GB106 -E
  • ./pk2cmd / PPIC24FJ256GB106 -GF / YOURPATH / Bus_Pirate / bpv3-BL44FW510-DUMP.hex

PD: Do I leave one more step?

Thank you.

Re: Brick Bus Pirate V3.6

Reply #5
If it's a Bus Pirate v3.6 then the chip is PIC24FJ64GA002. I'm sorry, I'm not familiar with pickit2 or how to use it from the command line.
Got a question? Please ask in the forum for the fastest answers.

Re: Brick Bus Pirate V3.6

Reply #6
Thank you very much, I was able to revive the pirate bus with Pickit 2