Dear all,
I would like to buy BBv4, but I have the following doubts:
1. is it compatible with Fedora?
2. does it work in combination with Vivado?
Thanks!
Giovanni
Google is your friend :)
Of course I have already googled those.
Then you know the answer? I did a quick Google and it was the second result on the page.
Hi AlL
I have parched BUS BLASTER 4.1a and try to connect the target device but getting message struck at 0/1
I did below steps
1.Download and install FTDI drivers for the FT2232 chip
2.Download and install UrJTAG -
3.connected BUS BLASTER 4.1a to PC via USB cable
4.opened Urjtag shell
5.checking JTAG connected
jtag> cable ft2232 interface=1
Connected to libftd2xx driver.
6.device connected to JATG
Jtag>detect
Warning- TDO seems to be struck at 0
Can I need to be update the CPLD logic or any thing else.
Can any on help me to resolve this issue.
Thanks
Abhay