Text only | Text with Images

Dangerous Prototypes

Dangerous Prototypes => Bus Pirate Development => Topic started by: martinp on March 16, 2017, 09:33:59 pm

Title: AUX2 pin and AVR programming
Post by: martinp on March 16, 2017, 09:33:59 pm
Hi there,

I wanted to use BPv4 to program several AVR MCUs on one board. I was planning to us CS and AUX* pins to reset each MCU. However, I ran into troubles, actually just the CS pin worked.

I needed that functionality badly, so I made a patch for both BPv4 firmware 7.1 and latest avrdude. The patch makes CS, AUX, AUX2 working correctly. I don't know if it could be handy for anybody else, if so, I can make a pull request with the change on github.

I am actually thinking about getting AUX1 working too, that is, however, a little bit harder. I have seen some discussion about that on internet in past, but it looks like it has never been implemented. Or am I wrong?

Cheers,

martin
Text only | Text with Images

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.00912047904session_write_close ( )...(null):0
20.00942179496ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.00942180272Database_MySQL->query( ).../DatabaseHandler.php:119
40.05422319008Database_MySQL->error( ).../Db-mysql.class.php:273